Register your computer using Network Configuration when the computer is not registered to Network Scan Destination of Scan To Computer of the machine.
Your computer may automatically be registered when the scanner driver is installed usually.
-
Check that the machine is turned on.
-
Click [Start], and then select [All Programs] > [Okidata] > [ActKey] > [Tool] > [Network Configuration].
-
Right-click [Show Network Configuration] in the task tray.
-
Select the scanner driver to be used, and then select [Properties] from the [Scanner] menu.
-
Click the [Register] tab.
As the computer information, the computer name, IP address and port number are displayed.
You do not need to set the computer name, because the computer's host name is automatically acquired.
Computer name (host name) is used as default address, but you can clear the "use computer name (host name)" check box and select IP address of the computer.
If multiple network cards are installed in the computer, multiple IP addresses are displayed.
Select the IP address of the network card that is currently used.
Change the current setting for the port number that is displayed if necessary.
-
Click [Register] to register your computer to Network Scan Destination of Scan To Computer of the machine.