The operation of the machine
If a power failure occurs, the machine operates as follows.
Note
-
If a power failure occurs, the machine is turned on, it will turn on automatically without pressing the power switch after the power is restored.
If you do not want the machine to turn on automatically after the power is restored, [Device Settings] > [Administrator Setting] > [User Install] > [Power Setup] > Set [Power Supply Return] to [Manual].
-
The operation that uses an uninterruptible power supply (UPS) or inverter is not guaranteed. Do not use an uninterruptible power supply (UPS) or inverter.
Machine's Status |
Operation |
---|---|
During a call |
You can continue talking. |
During a transmission |
The transmission stops halfway. When the power is restored,
|
During a reception |
The reception stops halfway. If the machine received one or more pages, the erased report is printed after the power is restored. A received image is not printed. |
Copying or printing a list |
Printing stops halfway. When the power is restored, start the print job again. |
Standby |
You cannot start another copy, fax, scan, or print job. You also cannot receive another fax. |
Stored fax data
-
Backing up data in memory
The image data stored in the memory is retained even if a power failure occurs or you turn the machine off.
-
Erased report
If the fax data in memory is lost, an erased report is printed automatically.
The following documents are eligible for an erased report.
-
Fcode Box Document
-
Documents received in memory
An erased report informs you of the following items of deleted data.
-
Document type
-
Fcode box number
-
Fcode box name
-
Destination name
-
Fcode confidential communication/Fcode bulletin board communication
-
Time when communication started
-
Number of received pages
-
Memo
If a fax is received with the manual reception, Fcode polling reception, or Fcode confidential reception, its reception type is also printed.