Fax Setup

Resolution

Normal

Sets the default image quality.

Density

0

Sets the default density to scan.

Scan Size

A4 or Letter

Sets the default scan size.

Continuous Scan(Glass)

OFF

Sets whether to use Continuous Scan.

Continuous Scan(ADF)

OFF

Edge Erase

Setting

OFF

Sets whether to erase the edge shadow created on Fax scan image.

Width

2 mm (0.1 inch)

Sets an erasing width created on Fax scan image.

TTI

ON

Sets whether to add the sender's name to the header of the sent fax by default.

Transmit Confirmation Report

OFF or ON

Sets whether to automatically print transmission results by default.

Memory Tx

ON

Sets whether to use memory transmission (ON) or real-time transmission (OFF) by default.

Configure Shortcuts

01: Manual Dial

02: Speed Dial

03: Group List

04: Redial

05: Off Hook

06: Resolution

Sets the shortcut button for the [Fax] tab.

Edit / Register

Confidential Box

Box Name

(NULL)

Sets the name for confidential boxes. You can enter up to 16 characters.

Sub-Address

(NULL)

Sets the sub-address for confidential box. You can enter up to 20 characters.

Hold Time

0

Sets the hold time for confidential box.

Available range: 0 to 31 days

I.D.Code

(NULL)

Sets the password for confidential box. Register a 4-digit numerical number only.

Bulletin Box

Box Name

(NULL)

Sets a bulletin box name. You can enter up to 16 characters.

Sub-Address

(NULL)

Sets the sub-address for bulletin box. You can enter up to 20 characters.

Delete

Deletes an Fcode box.

ID Check Tx

OFF

Sets whether to use the ID check transmission.

Broadcast Destination

ON

Sets whether to indicate the transmission destination number before starting broadcast transmission.

Confirm Dial

OFF

Sets whether to reenter the transmission destination fax number before sending a fax.

Secure Receive

Setting

OFF

Sets whether to store a received fax in the memory of this machine without printing immediately.

Password

(NULL)

Sets the password that is entered when printing a received fax image that is stored in the memory of this machine.

Delete after printing

Yes

Sets whether to delete a fax image after printing.

Redial Tries

2 times

Sets the number of redial attempts.

Available range: 0 to 9 times

Redial Interval

1 minute

Sets the time between redial attempts.

Available range: 0 to 5 minutes

Block Junk Fax

Setting

OFF

Sets Block Junk mode Fax.

Registered List

Register / Edit

(NULL)

Register / Edit addresses for Block Junk Fax when [Mode2] or [Mode3] is set.

Delete

Delete addresses for Block Junk Fax when [Mode2] or [Mode3] is set.

Ring Response

1 Ring

Sets the number of rings required before receiving an incoming fax.

Dialing Pause Duration

2 seconds

Sets the dial pause time.

Available range: 0 to 10 seconds

Rx Reduc. Rate

Auto

Sets the reception reduction rate.

Reduc. Margin

24 mm (0.9 inch) or 100 mm (3.9 inch)

Sets the threshold level of reception reduction.

Available range: 0 to 100 mm (0 to 3.9 inches)

ECM Mode

ON

Sets whether to use the error correction mode.

PreFix

(NULL)

Sets the dialing prefix. You can enter up to 40 digits.

Received Time Stamp

OFF

Sets whether to print the time stamp on received faxes.

Print Check Message

ON

Sets whether to report the error content if a transmission error occurs.

Service Bit

OFF

If set to OFF, some menu items are not displayed on the screen.

Country Code

International or U.S.A

Sets the country code.

A/R Full Print

ON

Sets whether to print the list of the communication results automatically after every 50 communications.

Tone For Echo (For Transmission)

Disable

Displays only if Service Bit is ON.

Tone For Echo (For Reception)

Disable

Displays only if Service Bit is ON.

H/Modem Rate (For Tx)

33.6 Kbps

Sets the default modem reception transmission speed while the machine is sending a fax.

H/Modem Rate (For Rx)

33.6 Kbps

Sets the default value of the modem transmission speed while the machine is receiving a fax.

Attenuator

10 dB, Range: 0 - 15 dB

Enter Attenuator. Displays only if Service Bit is ON.

MF Attenuator

8 dB, Range: 0 - 15 dB

Enter MF(Tone) Attenuator. Displays only if Service Bit is ON.

Pulse Make Ratio

40%, Range: 33, 39, 40%

Sets to make rate of DP (10 pps) during call. Displays only if Service Bit is ON and Tone / Pulse setting is PULSE.

Pulse Dial Type

N, Range: N, 10-N, N+1

Sets the pulse type for dialing. Displays only if Service Bit is ON and Tone / Pulse setting is PULSE.

MF(Tone) Duration

100 mseconds, Range: 75, 85, 100 mseconds

Enter MF(Tone) Duration. Displays only if Service Bit is ON and Tone / Pulse setting is TONE.

Calling Timer

60 mseconds, Range: 1 - 255 seconds

Displays only if Service Bit is ON.

PBX Line

OFF

When connecting to PBX (internal exchange), put it to [ON].

Forwarding Setting

Forwarding Setting

OFF

Sets whether to enable the fax forwarding mode.

Forwarding Number

(NULL)

Sets a fax number used for the fax forwarding mode.

TAD Mode

Type 3

Sets an operation type in Tel / Fax Ready mode.

[Type 3]: A fax signal is detected in 15 seconds from when the answering machine answers. Normally, use this type.

[Type 1]: A fax signal is detected right after the answering machine answers, and then the reception starts. If you have any fax reception problems, they may be improved if this type is set.

[Type 2]: A fax signal is detected right after the answering machine answers. Set this type if you usually use this machine as a phone.

Tel Priority Mode

OFF

Sets when the external telephone and the machine ring in Tel / Fax Ready mode.

[ON]: The sender is assumed to make a voice call. The telephone rings early.

CNG Detection

OFF

Sets whether to determine whether the sender is sending a fax during the off the hook condition in Tel / Fax Ready mode.

T/F Timer Programming

35 seconds

Sets when to start the auto fax reception if the communication does not start even after an incoming call arrives in Tel / Fax Ready mode or Ans / Fax Ready mode.

Soft Ringer Volume

High

Sets a phone ring volume in Tel / Fax Ready mode.

Remote Receive Number

OFF

Sets a remote switch over number.