oprogramowania

Pakiet oprogramowania układowego


Pakiet oprogramowania układowego jest dostępny do pobrania.

Zgodne modele

B412; B432; B512; ES4132; ES5112

* Narzędzie do aktualizacji oprogramowania układowego jest warunkiem przeprowadzenia instalacji po pobieraniu.

Pobieranie narzędzia do aktualizacji oprogramowania układowego >


Aby pograć pakiet oprogramowania układowego, musisz wyrazić zgodę na warunki dokumentu „Umowa licencyjna oprogramowania”. Zanim pobierzesz zawartość, przeczytaj umowę.

Przeczytaj umowę licencyjną oprogramowania >

Dane techniczne

Nazwa pliku OKI_B432_A01.72_0_4_245976.bin
Wersja A01.72_0_4
Rozmiar pliku 22,918,501 Byte
Wartość skrótu MD5 349addc6ae511d8f212dcfc362d0c93c

Historia aktualizacji

(note) In some case, you will have to set the menu setting again after updating the unit to the new firmware revision.
After FW update set the information again from the panel.


Firmware Ver.A01.72_0_4
CU : D1.72
Network/WebRemote : 00.53/00.31
IM : 02.03
PU : 00.00.37

1. Fixed a problem that the image may come out scrambled with using PS driver for macOS 10.14.
2. Fixed a problem that an error may occur when the PC is turned off/on after printing with USB connection.
3. Fixed a problem that the 2nd job may not be printed correctly while printing from the Linux driver with USB connection.


----------
Firmware Ver.A01.71_0_4
CU : D1.71
Network/WebRemote : 00.53/00.31
IM : 02.03
PU : 00.00.37

1.Treatment of the WPA2 protocol vulnerabilities.


----------
Firmware Ver.A01.70_0_4
CU : D1.70
Network/WebRemote : 00.53/00.31
IM : 02.02
PU : 00.00.37

1.Improvement in the fusing of duplex printing.


----------
Firmware Ver.A01.67_0_4
CU : D1.67
Network/WebRemote : 00.53/00.31
IM : 02.02
PU : 00.00.36

1.Upgrade Google Cloud Print security.
2.Fixed the problem that Error002 might be happened when WSD Print is done during the deep sleep mode.


----------
Firmware Ver.A01.63_0_4
CU : D1.61
Network/WebRemote : 00.52/00.31
IM : 02.01
PU : 00.00.36

1.Improved to detect some unknown consumable.


----------
Firmware Ver.A01.61_0_4
CU : D1.61
Network/WebRemote : 00.52/00.31
IM : 02.01
PU : 00.00.34

1.Fixed a problem that one of the following status might occur when turning on or restarting the PC connected to the printer with the USB cable.
- Nothing is displayed (Stay in the sleep state)
- The display does not change with key operation
- Does not print


----------
Firmware Ver.A01.60_0_4
CU : D1.60
Network/WebRemote : 00.52/00.31
IM : 02.01
PU : 00.00.34

1.Fixed a problem that Printer sends unnecessary reply to a certain command.
2.Update Google Cloud Print certificate.
3.Fixed a problem that WPS can't be set in case that [YES] is selected from [Setup Wireless?] that is displayed
at the time of first boot after enabling the wireless module.


----------
Firmware Ver.A01.58_0_4
CU : D1.58
Network/WebRemote : 00.52/00.30
IM : 02.01
PU : 00.00.34

1.Fixed a problem that PDL Error/PS Error/Error002 may occur when data is sent via network environment using jumbo frame.


----------
Firmware Ver.A01.54_0_4
CU : D1.54
Network/WebRemote : 00.52/00.30
IM : 02.00
PU : 00.00.33

1.Fixed a problem that security setting of wireless "WPA2-PSK" from panel will result to "WPA Encryption TYPE" being set to  "TKIP" instead of "AES".
2.Fixed a problem that LCD scroll displays become strange during Power Save mode.
3.Fixed a problem that decoding error occurs when printing a specified TIFF file.


----------
Firmware Ver.A01.42_0_4
CU : D1.42
Network/WebRemote : 00.52/00.30
IM : 02.00
PU : 00.00.32

1.Fixed a problem where the IP address setting will return to default value of automatic even when set to manual in an environment using the printer description file ver Ver 1.0.1 for Linux.
2.Fixed a problem where error lamp will blink once every 10 seconds during high network traffic while in deep sleep mode.
3.Fixed a problem where ERROR 002 will occur when network transmission is done from Macintosh.


----------
Firmware Ver.A01.38_0_4
CU : D1.38
Network/WebRemote : 00.50/00.30
IM : 01.05
PU : 00.00.31

1. Fixed a problem where after printing orientation settings on panel menu is set to landscape and machine is rebooted, settings will show landscape but the printed output will be portrait.
2. Fixed a problem where a different error will be notified when getting time from an SNTP server results to a failure.


----------
Firmware Ver.A01.36_0_4
CU : D1.36
Network/WebRemote : 00.49/00.30
IM : 01.05
PU : 00.00.31

1. Fixed a problem where Error code 002 will occur when the PC connected through USB cable is switched ON while machine is in DeepSleep mode.
2. Fixed a problem where Network will restart when receiving DHCP NAK after IP address is set.
3. Fixed a problem where machine will not resume from Sleep when there is no network connection and only USB cable is connected.


----------
Firmware Ver.A01.35_0_4
CU : D1.35
Network/WebRemote : 00.49/00.30
IM : 01.05
PU : 00.00.29

1. Added Wireless LAN security support.
2. Fixed a hang problem at Initializing stage when updating firmware from A01.22,A01.30.
3. Updated language Version.1.x to Version.2.0.
4. Fixed a rare problem where if power is cutoff when starting, Error code 081 will occur during next restart.
5. Fixed a network connection problem (cannot print when power save lamp blinks rapidly).
6. Fixed a problem where printing stops midway.
7. Fixed a toner remaining amount indication problem.


----------
Firmware Ver.A01.30_0_4
CU : D1.30
Network/WebRemote : 00.47/00.29
IM : 01.04
PU : 00.00.27

1. Fixed a problem that the unit can not connect to the network when the DHCP server is located on the different network segment.
2. Fixed a system freeze problem when going down to Sleep mode under the high network trafic, occasionally.
3. Fixed a problem that comes with a toner in streaks on the back side of the paper.


----------
Firmware Ver.A01.22_0_4
CU : D1.22
Network/WebRemote : 00.47/00.29
IM : 01.04
PU : 00.00.26

1. Improved function

----------

Firmware Ver.A01.16_0_4
CU : D1.16
Network/WebRemote : 00.47/00.29
IM : 01.04
PU : 00.00.26

1. Add "CONNECTED HOST" menu in "USB SETUP" category.
2. To fix an issue that not resume from Deep Sleep, occasionally.
3. To fix an issue of the reply for DHCP server during initializing process at wireless LAN.
4. To fix an issue that the problem of the process when wireless LAN connection is disconnected suddenly.
5. To fix an issue that the error 380 may occur during printing from Option tray in certain printing conditions.

----------
Firmware Ver.A01.10_0_4
CU : D1.10
Network/WebRemote : 00.45/00.29
IM : 01.03
PU : 00.00.23

1. Improved function

----------
Firmware Ver.A01.06_0_4
CU : D1.06
Network/WebRemote : 00.44/00.28
IM : 01.02
PU : 00.00.23

1. To support Google Cloud Print 2.0


Kontakt z firmą OKI Europe

linkedin twitter youtube