Firmware

Firmware Suite


De Firmware Suite is beschikbaar om te worden gedownload.

Toepasselijke modellen

MC363

* Het hulpprogramma voor de firmware-update is ook vereist voor de update nadat de firmware is gedownload.

Het hulpprogramma voor de firmware-update downloaden >


Om de Firmware Suite te downloaden, moet u akkoord gaan met de onderstaande ‘Softwarelicentieovereenkomst’. Zorg ervoor dat u deze leest voordat de update wordt gedownload.

Lees de Softwarelicentieovereenkomst >

Specificaties

Bestandsnaam OKI_MC363_A07.08_0_4_231588.bin
Versie A07.08_0_4
Bestandsgrootte 68,886,821 Byte
MD5 hash-waarde a939530388b22826cca4a3a4453291ac

Updategeschiedenis

(note) If you update the firmware on a unit that currently has a firmware version older than A07.08, please update the scanner driver to following version.
For Windows : Ver 1.2.3
For Linux : Ver 1.7.0
If you do not update the scanner driver, the error message is displayed at the time of scanning.


Firmware Ver. A07.08_0_4
CU:B7.08
PU:00.00.18
IM:01.02

1. Fixed a problem when receiving a fax manually, "Storage Space full" is displayed and the MFP sometimes can not receive faxes.
2. Partial specification change of Scan function.
Please update the scanner driver to following version.
For Windows : Ver 1.2.3
For Linux : Ver 1.7.0
If you do not update the scanner driver, the error message is displayed at the time of scanning.

--------------------------------------------------------------------------------------
Firmware Ver. A07.05_0_4
CU:B7.05
PU:00.00.18
IM:01.02

1. Support SMB2.0.
2. Treatment of  the WPA2 protocol vulnerabilities.
3. Fixed a problem of NTLMv2 authentication function that is used by Scan To Shared Folder.
--------------------------------------------------------------------------------------
Firmware Ver. A07.03_0_4
CU:B7.03
PU:00.00.18
IM:01.01

1. Updated regarding the smart Extendable Platform2.
2. Fixed a problem that the Custom Size section of Paper Size becomes a blank.
3. Fixed a problem that a fatal error occurs when scanning is canceled or paper jam occurs during scanning with ADF.
4. Fixed a problem that time changes to incorrect time when the Daylight Saving setting is set to ON.
   (Jan 1 0:00-0:59 change to Dec 31 23:00-23:59 every year.)
5. Fixed a wording problem that Usage Report in German is incorrect.
6. Upgrade Google Cloud Print security.
--------------------------------------------------------------------------------------
Firmware Ver. A05.05_0_4
CU:B5.05
PU:00.00.18
IM:01.01

1. Fixed a problem that one of the following status might occur when turning on or restarting the PC connected to the MFP with the USB cable.
- Nothing is displayed (Stay in the sleep state)
- The display does not change with key operation
- Does not print
- "815:Error" occurs
--------------------------------------------------------------------------------------
Firmware Ver. A05.04_0_4
CU:B5.03
PU:00.00.18
IM:01.01

1. Fixed a problem that the print will stop with indicating "Warming up." depending on the environmental temperature or the printer's condition after printing.
--------------------------------------------------------------------------------------
Firmware Ver. A05.03_0_4
CU:B5.03
PU:00.00.17
IM:01.01

1. Change of specifications on "Transmit and Receipt Journal Report". The Distant Station name of a telephone book is indicated on the Distant Station space.
2. Fixed a problem that when the setting is Duplex=ON and excuting simplex print using PS driver, 'Duplex print error.' may occur.
3. Fixed a problem that even if the menu of "setting of an attention LED of the near life position" is invalidated, it isn't reflected.
4. Indication change of the condition of wireless LAN (the AP mode) information.
5. Fixed a problem that change in the contrast of an operation panel isn't reflected.
6. Fixed a problem that in case of scan execution from a PC with macOS Sierra 10.12 and later, scan of both sides can't be done.
7. Fixed a problem that when scanning the both sides of a document with B6 size, 'ADF Jam' occurs.
8. Fixed a problem that "005:Error" occurs, when 'Scan to Shared Folder' is carried out by the specific environment.
9. Fixed a problem that only "Custom size" isn't indicated in the choices of [Device Setting]-[Paper Setup]-[Tray1]-[Paper Size] menu.
10. Fixed a problem that the high voltage of the relevant color will be not output and be print blurred, when the situation that a toner remaining amount becomes unsettled occurred. (The toner remaining amount is displayed '0%')
--------------------------------------------------------------------------------------
Firmware Ver. A03.06_0_4
CU:B3.02
PU:00.00.15
IM:01.00

1. To fix the problem [106:Error]  which is may happen when you start to print in high temperature after leaving the MFP in cold temperature for a long time.
--------------------------------------------------------------------------------------
Firmware Ver. A03.03_0_4
CU:B3.02
PU:00.00.13
IM:01.00

1. Throughput of printing from Tray 1 is improved.
--------------------------------------------------------------------------------------
Firmware Ver. A03.02_0_4
CU:B3.02
PU:00.00.12
IM:01.00

1. Improved to be able to confirm the completion history of the job with WebPage and Report print.
2. "Delivery Result" is changed which is in "Transmit Confirmation Report"and "Check Message Report" of Email/Internet FAX.
3. Measure of the problem with a case that a remaining amount(%) of the image drum unit is indicated less than an actual remaining amount.
4. Measure of the issue there is no each [RGB] of [Admin Setup]-[Copy Setup]-[Default Settings]-[Image Settings] menu in Configuration print.
--------------------------------------------------------------------------------------


Volg OKI Europe via sociale media

Facebook linkedin twitter youtube

©1995-Mon Mar 25 01:58:28 UTC 2019 Oki Europe Ltd.