Firmware

Firmware Suite


De Firmware Suite is beschikbaar om te worden gedownload.

Toepasselijke modellen

ES8453 MFP; ES8463 MFP; ES8473 MFP; ES8483 MFP; MC843; MC853; MC863; MC873; MC883

* Het hulpprogramma voor de firmware-update is ook vereist voor de update nadat de firmware is gedownload.

Het hulpprogramma voor de firmware-update downloaden >


Om de Firmware Suite te downloaden, moet u akkoord gaan met de onderstaande ‘Softwarelicentieovereenkomst’. Zorg ervoor dat u deze leest voordat de update wordt gedownload.

Lees de Softwarelicentieovereenkomst >

Specificaties

Bestandsnaam OKI_MC873_A07.84_0_6_243813.bin
Versie A07.84_0_6
Bestandsgrootte 201,432,453 Byte
MD5 hash-waarde 4f658c11653772d7984033179a342f68

Updategeschiedenis

Please use a version 1.2.1 or later of the firmware update tool for Windows.

(note1) If you are updating the firmware on a unit that currently has a firmware version older than A06.02 your User Authentication (Access Control) information saved in the MFP will be reset to the default settings.  
If you had previously changed any of the PIN, User ID, or User Name settings from the default settings you will have to set the information again for all users after updating the MFP to the new firmware revision.

(note2) If you are updating the firmware on a unit that currently has a firmware version older than A07.48,your setting time of Power Save and Sleep will be reset to the default one. Then please set them again.(for MC853/ES8453)

(note3) If you update the firmware on a unit that currently has a firmware version older than A07.82, please update the scanner driver to following version.
For Windows : Ver 1.2.3
For Linux : Ver 1.7.0
If you do not update the scanner driver, the error message is displayed at the time of scanning.

Firmware Ver. A07.84
CU F/W     07.84
SU F/W        07.82
PU F/W        00.06.31
NIC / Web F/W    00.68/01.64
IM F/W        03.03
CU Loader    01.13
TU F/W        00.07.83
Language    1.65

This version modified the following.

1. Fixed a problem that the image may come out scrambled with using PS driver for macOS 10.14.

-----------
Firmware Ver. A07.83
CU F/W     07.83
SU F/W        07.82
PU F/W        00.06.31
NIC / Web F/W    00.68/01.64
IM F/W        03.03
CU Loader    01.13
TU F/W        00.07.83
Language    1.65

This version modified the following.

1. Fixed a problem when Error 078 occurred by panel operation.
2. Fixed a problem that the wrong message about toner empty in Polish error log is displayed.
3. Fixed a problem that URL for the GCP registration can not be printed.

-----------
Firmware Ver. A07.82
CU F/W     07.81
SU F/W        07.82
PU F/W        00.06.31
NIC / Web F/W    00.68/01.64
IM F/W        03.03
CU Loader    01.13
TU F/W        00.07.81
Language    1.64

This version modified the following.

1. Fixed a problem when receiving a fax manually, "Storage Space full" is displayed and the MFP sometimes can not receive faxes.
2. Set the country code to Germany. ERROR 078 occurs when an error occurs by fax transmission.
3. Fixed a problem that may not return from sleep mode.
4. Partial specification change of Scan function.

Please update the scanner driver to following version.
For Windows : Ver 1.2.3
For Linux : Ver 1.7.0
If you do not update the scanner driver, the error message is displayed at the time of scanning.

-----------
Firmware Ver. A07.78
CU F/W     07.78
SU F/W        07.72
PU F/W        00.06.31
NIC / Web F/W    00.68/01.64
IM F/W        03.03
CU Loader    01.13
TU F/W        00.07.71
Language    1.63

This version modified the following.

1. Display of the setting value is changed  min to sec, can set every 15 sec.

-----------
Firmware Ver. A07.73
CU F/W     07.73
SU F/W        07.70
PU F/W        00.06.31
NIC / Web F/W    00.68/01.64
IM F/W        03.03
CU Loader    01.13
TU F/W        00.07.70

This version modified the following.

1. Treatment of the WPA2 protocol vulnerabilities.
2. Fixed a problem of NTLMv2 authentication function that is used by Scan To Shared Folder.

-----------
Firmware Ver. A07.72
CU F/W     07.72
SU F/W        07.70
PU F/W        00.06.31
NIC / Web F/W    00.67/01.64
IM F/W        03.03
CU Loader    01.13
TU F/W        00.07.70

This version modified the following.

1. Support SMB 2.0.
2. Upgrade Google Cloud Print security.
3. Fixed the problem that Error002 might be happened when WSD Print is done during the deep sleep mode.
4. Fixed a problem that print adjusting for tray3/tray4 does not work.
6. Fixed a wording problem that Usage Report in German is incorrect.

-----------
Firmware Ver. A07.62
CU F/W     07.62
SU F/W        07.62
PU F/W        00.06.31
NIC / Web F/W    00.65/01.63
IM F/W        03.02
CU Loader    01.13
TU F/W        00.07.62

This version modified the following.

1. Improved to select a specific destination by "all display" button after selecting multiple destinations.
2. Update Google Cloud Print certificate.
3. Fixed a problem that Error 078 occurs when capital letters are input to URI Scheme from Web browser.
4. Fixed a problem that Error 073 may occur when copying on Both Sides of Paper.

-----------
Firmware Ver. A07.51
CU F/W     07.51
SU F/W        07.47
PU F/W        00.06.30
NIC / Web F/W    00.65/01.63
IM F/W        03.02
CU Loader    01.13
TU F/W        00.07.47

This version modified the following.

1. Modified the setting time of Power Save and Sleep. (for MC853/ES8453 MFP)
   After updating the firmware, your setting time will be reset to the default one. Then please set them again.

-----------
Firmware Ver. A07.48
CU F/W     07.48
SU F/W        07.47
PU F/W        00.06.30
NIC / Web F/W    00.65/01.63
IM F/W        03.02
CU Loader    01.13
TU F/W        00.07.47

This version modified the following.

1. Fixed a problem that printing via wired LAN may be slow.
2. Fixed a problem that MFP may not return from Deep Sleep state.
3. Fixed a problem that Scan To Shared Folder cannot be performed to OSX10.10.
4. Fixed a problem that 'Simplex printing was performed as the paper setting did not allow duplex printing.' or 'Duplex print error.' may occur when the setting is Duplex=ON and excuting simplex print using PS driver.
5. Fixed a problem that Duplex Scan can't be done in case of scan execution from a PC with macOS Sierra 10.12 and later.
6. Fixed the wording error in French.

-----------
Firmware Ver. A07.36
CU F/W     07.36
SU F/W        07.36
PU F/W        00.06.30
NIC / Web F/W    00.65/01.63
IM F/W        03.02
CU Loader    01.13
TU F/W        00.07.35

This version modified the following.

1. Improved the accuracy of document size detection on Flatbed.
2. Prevented the unnecessary "Communication error Tx".
3. "Delivery Result" is changed which is in "Transmit Confirmation Report" and "Check Message Report" of Email/Internet FAX.
4. Fixed a problem that ErrorFFE may occur.
5. Fixed a problem that Error078 may occur after Power On.
6. Fixed a problem that LCD may show sandglass screen after Power On.

-----------
Firmware Ver. A07.28
CU F/W     07.28
SU F/W        07.27
PU F/W        00.06.29
NIC / Web F/W    00.64/01.59
IM F/W        03.01
CU Loader    01.02
TU F/W        00.07.27

This version modified the following.

1. Fixed a problem that may does not work the Output Tray menu setting(Device Settings > Paper Setup> Output Tray).

-----------
Firmware Ver. A07.27
CU F/W     07.27
SU F/W        07.27
PU F/W        00.06.29
NIC / Web F/W    00.64/01.59
IM F/W        03.01
CU Loader    01.02
TU F/W        00.07.27

This version modified the following.

1. Improved an Error Message when Document Jam has occurred.
2. Improved that the user can specify a password for Fcode communication.
3. Add the setting that the name of the phone book is displayed in priority to the "Distant Station" field of fax transmission history.
4. Fixed a problem that white page is printed when the White Page Skip setting(Admin Setup  > Print Setup >PCL Setup) is ON.
5. Fixed a problem that the time displayed on the operation panel is progressing when returning from Deep Sleep state.
7. Fixed a problem that Error106 may occur when returning from Power Save state.

18/Nov/2016
Deleted "6. Fixed a problem that Scan To Shared Folder cannot be performed to OSX10.10."

-----------
Firmware Ver. A07.13
CU F/W     07.13
SU F/W        07.12
PU F/W        00.06.28
NIC / Web F/W    00.63/01.59
IM F/W        03.00
CU Loader    01.02
TU F/W        00.07.12

This version modified the following.

1. Fixed a problem that Error010 occurs after fax reception when the function of Forwarding Received Document Data to an E-mail Destination (Auto Delivery) is enabled.

-----------
Firmware Ver. A07.12
CU F/W     07.12
SU F/W        07.12
PU F/W        00.06.28
NIC / Web F/W    00.63/01.59
IM F/W        03.00
CU Loader    01.02
TU F/W        00.07.12

This version modified the following.

1. Add "Tx/Rx Journal" button to Fax/InternetFax top screen.
2. Fixed a problem that AirPrint Scan cannot be performed from OSX10.11.
3. Fixed a problem that an internet fax job is not printed out in a receiver machine when transmitting an internet fax job.
4. Fixed a problem that decoding error occurs when printing a specified TIFF file.
5. Fixed a problem that ERROR 002 may occur when network transmission is done from Macintosh.
6. Fixed a problem that the IP address setting will return to default value of automatic when the device is forced to power off.
7. Fixed a problem that "0" setting button on the operator panel does not appear only in French.
8. Improved the name of the buttons on the soft keyboard of Web Browser in French.

-----------
Firmware Ver. A07.08
CU F/W     07.05
SU F/W        07.08
PU F/W        00.06.28
NIC / Web F/W    00.61/01.58
IM F/W        03.00
CU Loader    01.02
TU F/W        00.07.01

This version modified the following.

1. Fixed a problem that noise from feeding document and wrinkles in the document when document width guide on the ADF will be a loose case.

-----------
Firmware Ver. A07.05
CU F/W     07.05
SU F/W        07.01
PU F/W        00.06.28
NIC / Web F/W    00.61/01.58
IM F/W        03.00
CU Loader    01.02
TU F/W        00.07.01

This version modified the following.

1. Fixed a problem that group information is occasionally delayed the update when user edited the address book from Configuration Tool.

-----------
Firmware Ver. A07.01
CU F/W     07.01
SU F/W        07.01
PU F/W        00.06.28
NIC / Web F/W    00.61/01.58
IM F/W        03.00
CU Loader    01.02
TU F/W        00.07.01

This version modified the followings.

1. To support the "Auto detect paper size" setting of the Paper size for WSD Scan.
2. To support AirPrintScan for Macintosh via wireless LAN (AP mode).
3. Fixed a problem that "Cancel" button does not work when "Generating data..." message on the operator panel is displayed during secure print.
4. Fixed a problem that "Close" button does not work when "Black Image Drum Life." message on the operator panel is displayed during copy.
5. Fixed a problem that Error 078 occurs during the display of the status screen.
6. Fixed a problem that Error 067 occurs.
7. Fixed a problem that fails to Scan To Shared Folder.
  As problems occur the following conditions: MFP is connected to the PC via wireless LAN and specified the PC by COMPUTER NAME in the profile.
8. Fixed a problem that does not work the Tray4 setting other than "ON" for Copy.
  Device Setting > Paper Setup> Select Tray > Copy> Tray4
9. Fixed a problem that cannot register and edit the role information from Web page.
  As problems occur the following conditions: A shared account name that contains the space character has been involved.
10. Fixed a problem that may not be able to print when using "Device Name" as the port name of the printer driver.
11. Fixed a problem that the completion screen does not pop up on the PC after running the Google Cloud Print.
  As problems occur the following conditions: enabling "Popup notification" setting of "Alert Info" by using the Configuration Tool.

-----------
Firmware Ver. A06.90
CU F/W     06.90
SU F/W        06.90
PU F/W        00.06.27
NIC / Web F/W    00.57/01.56
IM F/W        03.00
CU Loader    01.02
TU F/W        00.06.90

This version modified the followings.

1. To support the AP mode(wireless LAN).
2. Improved to the wired and wireless LAN can be connected at the same time. (If a wired LAN and wireless LAN are connected to the same subnet, the communication may be unstable.)
3. Add a setting to switch the default screen of the fax to a speed dial.
4. Add a setting to disable the "Manual Dial" button on the fax.
5. Improved to a fax reception job can be stored up to 1000 (Max.).
6. To support the Paper Cut.(for solution)
7. Reduced the noise while warming up the unit after turning on.
8. Fixed the French messages displayed on the panel.
9. Fixed a problem that the space character cannot be used as the value of [LDAP Value] from Web page.
10. Fixed a problem that MFP cannot Fax communication with "Storage Space Full" message on the operator panel.
11. Fixed a problem that MFP rarely be hung up with "Fax receiving..." message on the operator panel when the line cable is disconnect during Fax receiving.
12. Fixed a problem that MFP rarely be hung up with "Shutdown in progress" message on the operator panel when the Power button is pressed during Fax transmitting.
13. Fixed a problem that MFP cannot work Fax communication.
14. Fixed a problem that blank screen is displayed on the panel when user trys to transmit a FAX manually in condition of Fax memory full.
15. Fixed a problem that Error055 may occur when MFP is started.
16. Fixed a problem that Error078 may occur when pressing "STATUS" key.
17. Fixed a problem that Error078 may occur when setting E-mail Setting via easy setup menu.
18. Fixed a problem that Error078 may occur when MFP is started.
19. Fixed a problem that "Connection failed." message is displayed on the panel when the security settings of wireless is changed to "WPA/WPA2-PSK".
20. Fixed a problem that "Adjust Scan Position" menu is not displayed in Admin Setup.
21. Fixed a problem that the image of K 100% (true black) is not printed with only K toner even though user selects "Preserve Black" by PS driver.
22. Fixed a problem that gray is printed with true black even though user selects "Composite Black [CMYK]" for "Black Finish" by PS driver.
23. Fixed a problem that Error code:39x(Paper Jam) is mis-detected rarely.
24. Fixed a problem that light gray is printed too pale or not visible when user selects "True Black [K]" for "Black Finish" by PCL driver.

-----------
Firmware Ver. A06.67
CU F/W     06.67
SU F/W        06.66
PU F/W        00.06.25
NIC / Web F/W    00.49/01.49
IM F/W        03.00
CU Loader    01.02
TU F/W        00.06.66

This version modified the followings.
1. Add a function to display the usage counter in each user from Web page.
   View Info > Usage Report > User Counter
2. Add a function to display the usage counter in each account from Web page.
   View Info > Usage Report > Account Counter
3. Add a function to export to .csv file at the usage counter from Web page.
   View Info > Usage Report > Export
4. Add a function to print "User Counter Report" and "Account Count Report".
   Device Setting > Report > System
   "User Counter Report" button appears on the panel when "Access Control" setting is "Enable".
   "Account Count Report" button appears on the panel when "Quota Management" setting is "Enable".
5. Fixed a problem that the document cannot be correctly set on ADF if the paper feed roller fell by the impact that closing the document holder cover.
6. Fixed a problem that "ADF Document Jam<0202>" occurs when A3 document was scanned from the automatic document feeder.
7. Fixed a problem that MFP may be hung up. (This problem depends on the FAX board.)
   *LCD shows sandglass screen after Power On.
   *LCD shows black screen when returning from Deep Sleep state.
   *Fax does not work after the fax transmission.
   *Fax does not work after the fax reception.
8. Fixed a problem that MFP is hung up after Power On.
   *LCD shows black screen.
   *LCD shows "OKI"logo screen.
   *LCD shows sandglass screen.
9. Fixed a problem that the panel does not accept the operation while LCD shows black screen.
10. Fixed a problem that cannot be FAX Transmission "Cannot scan A6 size document with duplex." is displayed on the LCD.
   As problems occur the following conditions: Scan Size is Auto and Duplex Scan is ON.
11. Fixed a problem that Web Page is not displayed correctly in Firefox/Chrome browsers.
12. Fixed a problem that the range of PIN setting is incorrect if a user tries to register a local user to copy the Admin user on Web page.
13. Fixed a problem that a user can be executed the job macro other than the Indexed Scan in the panel even if "Edit Job Macro setting" of role information is not permitted.

-----------
Firmware Ver. A06.52
CU F/W     06.52
SU F/W        06.52
PU F/W        00.06.25
NIC / Web F/W    00.49/01.46
IM F/W        03.00
CU Loader    01.02
TU F/W        00.06.52

This version modified the followings.
1. To support the Custom Size setting of the Scan size for ScanToUSBMemory/ScanToE-mail/ScanToSharedFolder.
2. Add a function to send E-Mail for Fax reception notification.
   This function can be set from Web Page.(Admin Setup>Network>Email>Fax Reception Notification Setting.)
3. Add "Received Documents" button to Fax/InternetFax top screen.
4. Improve to display a list of authentication print job and encrypted authentication print job.
5. To support AZERTY keyboard.
6. To support "simple" as the authentication method for "Authenticate LDAP Name"/"Authenticate LDAP PIN"/"Authenticate LDAP IC Card".
7. Add the Adjust Scan Position menu to Admin Setup.
8. Fixed a problem that A4 portrait document set on the document glass is sometimes recognized as an A3 size when selecting "AUTO" mode of "Scan Size" for Copy/Scan/Fax.
9. Fixed a problem that "ADF Document Jam<0202>" occurs when the two-fold of the A3 document was scanned from the automatic document feeder.
10. Fixed a problem that Duplex Copy does not work from the original glass.
    As problems occur the following conditions: Background Removal is an non-Auto and Duplex Copy is 1->2.
11. Fixed a problem that a user cannot change "Edge Erase" setting (Admin Setup > Fax Setup > Default Setting) from Web Page when "Unit of Measure" setting (Admin Setup > Management > Systems Setup) is "Millimeter".
12. Fixed a problem that FAX image is sent by the document size before the change when a user changes the document size in the middle of a job in the Fcode box.
    As problems occur the following conditions: Scan Size is Auto and Continuous Scan is ON.
13. Fixed a problem that the number of the group list is not displayed only one digit when the E-mail group has been registered 10 or more.
14. Fixed a problem that "IC card information Delete" button does not work when a user is logged in Local User on the panel.
15. Fixed a problem that a user can select the JPEG as the file format in the scan of the Web browser.
16. Fixed a problem that Transmission Log for InternetFax/ScanToFaxServer/PC-Fax can not be displayed on the Web page when Transmission Settings setting is ON.
17. Fixed a problem that MFP cannot connect to the network. "Network Initializing" message is frequently displayed on the panel.

-----------
Firmware Ver. A06.31
CU F/W     06.28
SU F/W        06.29
PU F/W        00.06.24
NIC / Web F/W    00.46/01.39
IM F/W        03.00
CU Loader    01.02
TU F/W        00.06.31

This version modified the followings.
1. Fixed a problem that an adjustment result is not reflected even if the user carry out a "Panel Calibration" function to coordinate a position of the touch panel,when MFP is restarted.

-----------
Firmware Ver. A06.30
CU F/W     06.28
SU F/W        06.29
PU F/W        00.06.24
NIC / Web F/W    00.46/01.39
IM F/W        03.00
CU Loader    01.02
TU F/W        00.06.30

This version modified the followings.
1. Fixed a problem that Error231 may occur during use.
2. Fixed a problem that a user can not start transmission a Fax to multiple destinations at the same time.
3. Fixed a problem that Error078 occurs when a user transmits a Fax to multiple destinations at the same time.
   *The problem of 2 and 3 occurs only when document size cannot detect while selecting "AUTO" mode of "Scan Size".

-----------
Firmware Ver. A06.29
CU F/W     06.28
SU F/W        06.29
PU F/W        00.06.23
NIC / Web F/W    00.46/01.39
IM F/W        03.00
CU Loader    01.02
TU F/W        00.06.28

This version modified the followings.
1. Fixed a problem that Error106 may occur during use.
2. The problem that wording "Trykk" instead of "Utskrift" is displayed in Norwegian.

-----------
Firmware Ver. A06.28
CU F/W     06.28
SU F/W        06.25
PU F/W        00.06.22
NIC / Web F/W    00.46/01.39
IM F/W        03.00
CU Loader    01.02
TU F/W        00.06.28

This version modified the followings.
1. Improve the detection time after setting the documents on ADF/document glass when selecting "AUTO" mode of "Scan Size" for Copy/Scan/Fax.

-----------
Firmware Ver. A06.27
CU F/W     06.27
SU F/W        06.25
PU F/W        00.06.22
NIC / Web F/W    00.46/01.39
IM F/W        03.00
CU Loader    01.02
TU F/W        00.06.25

This version modified the followings.
1. To support the Supplies Report.
  The Supplies Report is printed by the following procedure.
 Device Settings > Reports > system > Supplies Report
2. Fixed a problem that "Back" button is not displayed on the soft keyboard of Web Browser after the user has entered the Email address in ScanToEmail.
3. Fixed a problem that failed the IM F/W update.
4. Fixed a problem that Error072 occurs when returning from Deep Sleep state.
   *Error106 may occur during use after update for this firmware.When this Error occurs, please turn off / on the power of MFP.
5. Fixed a problem of Fax transmission which cannot get correct results when the Color Mode menu setting(Admin Setup > Scanner Setup > Default Setting) is Auto(Color/Grayscale) or Color or Grayscale.
  The detail phenomenons are as follows.
  (1) The output images will be distorted inappropriately and then give incorrect results in fact though the sequence of procedures will be completed correctly if it is a portrait document.
  (2) The sequence of procedures will be not completed and then it gets back to the standby state to wait for next event again if it is the landscape documents which has less than 5 pages.
  (3) The sequence of procedures will be not completed and then hold Scanning status if it is the landscape documents which has more than 6 pages.

6. Fixed a problem of Fax transmission which cannot get correct results if the document has more than 2 pages when the File Format menu setting(Admin Setup > Scanner Setup > Default Setting) is Single-Tiff or Single-PDF and moreover the Continuous Scan menu setting is ON.
  The detail phenomenons are as follows.the
  (1) Preview button and Start Transmission button on the preview screen does not work remains grayed out when the Preview menu setting is ON.
  (2) Scanning status will hold when the Continuous Scan menu setting is ON.

7. Fixed a problem of Internet Fax/Fax Server function that does not work even if the Resolution menu setting is changed when the Continuous Scan menu setting is ON.
8. Fixed a problem that does not work even the Edge Erase menu setting in the Fax function is changed from ON to OFF when the Edge Erase menu setting(Admin Setup > Fax Setup > Default Settings) is ON.
9. Fixed a problem of Fax/Internet Fax/Fax Server function that turns the scan images upside down when a user tried doing again with changing the document orientation(portrait/landscape) after the [Please set next document] screen is displayed.
   As problems occur the following conditions:Scan Size is Auto and Continuous Scan is ON and Duplex Scan is ON.
10. Fixed a problem of Fax send that turns the scan images upside down when a user tries doing with the landscape document on the document glass after that if the portrait document had been scanned even if once when the Continuous Scan menu setting is ON.

-----------
Firmware Ver. A06.23
CU F/W     06.23
SU F/W        06.23
PU F/W        00.06.21
NIC / Web F/W    00.46/01.39
IM F/W        03.00
CU Loader    01.02
TU F/W        00.06.23

This version modified the followings.

1. To support the Sendys Explorer(for solution).
2. To support the Wireless LAN WPA/WEP.
3. To support the AUTO setting of the Scan size when the FAX continuous scan ON setting.
4. Add the ability to put the page number to FAX received image.
5. Improvement of easy setup.
6. Improved that the progress of the check all sectors are displayed on the panel.
7. Improved that the “admin” adds to "Admin Name:"field of Administrator Login as default.
8. Fixed a problem that an error occurs when a user is registered to the same account with the registered account.
9. Fixed a problem that Error055 occurs when a user sends PC Fax by using MC860/MC861/MC862/MC851/MC852/ES8460/ES8461/ES8462/ES8451/CX2633 Fax driver.
10. Fixed a problem that the destination of ScanToEmail can not set to the address without '@'.
11. Fixed a problem that an error occurs when Home Screen set to Fax/Internet Fax.
12. Fixed a problem that an error occurs when setting the Macintosh in the auto-discovery to OFF from Web Page in an IPv6 environment.
13. Fixed a problem that does not appear shift key is on the screen to enter a capital letter when the user enters a file name by the soft keyboard.This problem occurs in Hungarian, Czech, Polish only.
14. Fixed a problem that the print counter resets and/or Error163,occasionally.
   *Error106 may occur during use after update for this firmware.When this Error occurs, please turn off / on the power of MFP.

15. Fixed the error code of Stacker Full.
16. Fixed the miss-spelling of the Web Page.

-----------
Firmware Ver. A06.02
CU F/W     06.02
SU F/W        06.02
PU F/W        00.06.20
NIC / Web F/W    00.41/01.31
IM F/W        03.00
CU Loader    01.02
TU F/W        00.06.02

This version modified the followings.

1. To support the PDF/A.
2. To support the IC card authentification.
3. To support the smart Extendable Platform2.
4. To support the Center Erase setting for Book Copy.
5. Improved that the Email address of the login user adds to "To:"field of ScanToEmail automatically.
6. Improved the interrupt copy function.
7. Fixed a problem that MFP can not connect to the network when the DHCP server is located on different network segments.
8. Fixed the wording error in Polish.
9. Fixed a problem that an error occurs in the PDF Print when the access control is "color printing" prohibited,occasionally.
10. Fixed a problem that an error occurs when user cancel the job while eading the document with "mixed scan" and "high-resolution" setting.
11. Fixed a problem that the FAX transmission error occurs when user send the FAX by using One-touch Button.It occurs only when storing more than 128 destinations in address book.

-----------
Firmware Ver. A04.02
CU F/W     04.02
SU F/W        04.02
PU F/W        00.06.20
NIC / Web F/W    00.34/00.29
IM F/W        03.00
CU Loader    01.02
TU F/W        00.04.02 or 00.04.03

This version fixed the followings.

1. To support the Single-PDF.
2. To retrieve "Job macro" registered in the product also to copy to other product.
3. To support the Book Copy.
4. To print separately by receiving and transmitting FAX Report.
5. To print a FAX communication daily report manually or automatically.
6. To support the background removal setting as ScanToFax function.
7. To beep sound when this product wakes by pushing the power-saving key during sleep mode.
8. To display the phone number in the subject line of your FAX received data file that was saved by the transmission data save function.
9. To print configuration report in A4 or Letter size paper depends on the default paper size of setting.
10. Fixed a problem that PCL / PS Form macro and authentication print job can not be erased even if you run a Erase Privacy Data in the admin menu.
11. Fixed a problem that the simple setting confirmation and address book can not be used when you cancel the scan preview in ScanToEmail.
12. Fixed a problem that the file can not be opened that was saved with the transmission data save function and its format is HPDF.
13. Fixed a problem that the file can not be opened that was saved by the transmission data save function and in auto color mode and file format is Tiff/Single Tiff.
14. The problem of a copy vertical and horizontal magnification, enabling both sides set or Nup settings have been fixed.
15. The problem that wording “Preview” instead of “Cancel Preview” is displayed when Scan Preview. This is in the German, Spanish, Swedish, Norwegian, Danish, Dutch, Portuguese, Brazilian Portuguese, Polish, Russian, Greek and Catalan.

-----------
Firmware Ver. A01.06
CU F/W     01.06
SU F/W        01.06
PU F/W        00.06.17
NIC / Web F/W    00.23/00.22
IM F/W        01.02
CU Loader    01.02
TU F/W        00.01.06

It has been fixed following problem.

1. A part of WebPage may not be displayed.
2. Configuration page of Russian and the Greek may be garbled.

-----------
Firmware Ver. A01.05
CU F/W     01.05
SU F/W        01.05
PU F/W        00.06.17
NIC / Web F/W    00.23/00.22
IM F/W        01.02
CU Loader    01.01
TU F/W        00.01.05

It has been fixed following problems.

1. Incorrect B6-Half copy.
2. Paper request occurs with custom size copy but in inch setting only.
3. LCD may show blank dialog in stacker full condition when "STATUS" button is pressed.
4. LCD may show black screen when MFP is connected via a wired LAN.
5. With Configuration Tool, user cannot setup ScanTo I-FAX/Fax Server authority.
6. LCD may shows black screen after changing a language.
7. MFP doesn’t automatically recognize the document size of Flatbed when returning from Deep Sleep state by open/close the Flatbed cover.





Volg OKI Europe via sociale media

Facebook linkedin twitter youtube

©1995-2019 Oki Europe Ltd.