펌웨어

펌웨어 스위트


펌웨어 스위트는 다운로드가 가능합니다.

적용 가능한 모델

ES4172LP MFP; MB472

* 펌웨어 업데이트 도구는 펌웨어를 다운로드한 후 업데이트해야 합니다.

펌웨어 업데이트 도구 다운로드 >


펌웨어 스위트를 다운로드하려면 다음 "소프트웨어 라이선스 계약"에 동의해야 합니다. 다운로드하기 전에 반드시 읽으십시오.

소프트웨어 라이선스 계약 읽기 >

사양

파일 이름 OKI_MB472_A01.73_0_4_258617.bin
버전 A01.73_0_4
파일 사이즈 31,453,685 Byte
MD5 해시 값 90554f64cd15456a69cc577fe91a3806

업데이트 내역

(note) In some case, you will have to set the menu setting again after updating the unit to the new firmware revision.
Before updating the firmware, please backup the menu setting by using the configuration tool and restore them after updating the firmware.
When be not used Configuration Tool,after FW update set the information again from the panel.


Firmware Ver.A01.73_0_4
CU : C1.73
Network/WebRemote : 00.58/00.34
IM : 02.03
PU : 00.00.37

1. Fixed a problem that an error may occur when the PC is turned off/on after printing with USB connection.
2. Fixed a problem that the 2nd job may not be printed correctly while printing from the Linux driver with USB connection.


----------
Firmware Ver.A01.72_0_4
CU : C1.72
Network/WebRemote : 00.58/00.34
IM : 02.03
PU : 00.00.37

1. Fixed a problem when receiving a fax manually, "Storage Space full" is displayed and the MFP sometimes can not receive faxes.


----------
Firmware Ver.A01.71_0_4
CU : C1.71
Network/WebRemote : 00.58/00.34
IM : 02.03
PU : 00.00.37

1.Treatment of the WPA2 protocol vulnerabilities.
2.Fixed a problem of NTLMv2 authentication function that is used by Scan To Shared Folder.


----------
Firmware Ver.A01.70_0_4
CU : C1.70
Network/WebRemote : 00.57/00.34
IM : 02.02
PU : 00.00.37

1.Improvement in the fusing of duplex printing.


----------
Firmware Ver.A01.67_0_4
CU : C1.67
Network/WebRemote : 00.56/00.34
IM : 02.02
PU : 00.00.36

1.Support SMB 2.0.
2.Upgrade Google Cloud Print security.
3.Fixed the problem that Error002 might be happened when WSD Print is done during the deep sleep mode.


----------
Firmware Ver.A01.63_0_4
CU : C1.61
Network/WebRemote : 00.53/00.33
IM : 02.01
PU : 00.00.36

1.Improved to detect some unknown consumable.
2.Fixed a problem that one of the following status might occur when turning on or restarting the PC connected to the MFP with the USB cable.
- Nothing is displayed (Stay in the sleep state)
- The display does not change with key operation
- Does not print
- 815 error occurs
3.Fixed a problem that Duplex Scan can't be done in case of scan execution from a PC with macOS Sierra 10.12 and later.


----------
Firmware Ver.A01.60_0_4
CU : C1.60
Network/WebRemote : 00.53/00.33
IM : 02.01
PU : 00.00.34

1.Fixed a problem that MFP sends unnecessary reply to a certain command.
2.Update Google Cloud Print certificate.


----------
Firmware Ver.A01.58_0_4
CU : C1.58
Network/WebRemote : 00.53/00.32
IM : 02.01
PU : 00.00.34

1.Fixed a problem that Scan To Shared Folder cannot be performed to OSX10.10.
2.Fixed a problem that PDL Error/PS Error/Error002 may occur when data is sent via network environment using jumbo frame.
3."Delivery Result" is changed which is in "Transmit Confirmation Report" and "Check Message Report" of Email/Internet FAX.

----------
Firmware Ver.A01.53_0_4
CU : C1.53
Network/WebRemote : 00.52/00.31
IM : 02.00
PU : 00.00.33

1.Fixed a problem that an internet fax job is not printed out in a receiver machine when transmitting an internet fax job.
2.Fixed a problem that decoding error occurs when printing a specified TIFF file.

----------
Firmware Ver.A01.43_0_4
CU : C1.43
Network/WebRemote : 00.52/00.31
IM : 02.00
PU : 00.00.32

1.Fixed a problem where the IP address setting will return to default value of automatic even when set to manual in an environment using the printer description file Ver 1.0.1 for Linux.
2.Fixed a problem where AirPrint Scan cannot be performed from OSX10.11.
3.Fixed a problem where ERROR 002 will occur when network transmission is done from Macintosh.
4.Fixed a problem that MFP cannot work Fax communication.
5.Fixed a problem where after printing orientation settings on panel menu is set to landscape and machine is rebooted, settings will show landscape but the printed output will be portrait.
6.Fixed a problem that printing via network does not work in some cases.


----------
Firmware Ver.A01.36_0_4
CU : C1.36
Network/WebRemote : 00.49/00.31
IM : 01.05
PU : 00.00.31

1. Fixed a problem where machine will no longer boot when power is cut off immediately after receiving Fax.
2. Fixed a problem where when file format is specified as S-Tiff in scan initial settings then Fax continuous reading is done, reading for the second time onwards will result to hang.
3. Fixed a problem where Network will restart when receiving DHCP NAK after IP address is set.
4. Fixed a problem where machine will not resume from Sleep when there is no network connection and only USB cable is connected.
5. Fixed a problem where machine will not resume from Sleep during continuous Sleep resume test through USB connection/disconnection.
6. Fixed a system freeze problem when Reset Settings on Panel is executed while Wireless LAN is ON.


----------
Firmware Ver.A01.35_0_4
CU : C1.35
Network/WebRemote : 00.49/00.31
IM : 01.05
PU : 00.00.29

1. Added Wireless LAN security support.
2. Added user menu for correction of ADF scan point location.
3. Fixed a rare problem where if power is cutoff when starting, Error code 081 will occur during next restart.
4. Fixed a network connection problem (cannot print when power save lamp blinks rapidly).
5. Fixed a problem where printing stops midway.
6. Fixed a toner remaining amount indication problem.


----------
Firmware Ver.A01.30_0_4
CU : C1.30
Network/WebRemote : 00.47/00.28
IM : 01.04
PU : 00.00.27

1. Improvement of the paper feed jam from the Automatic Document Feeder.
2. Fixed a problem that the unit can not connect to the network when the DHCP server is located on the different network segment.
3. Fixed a system freeze problem when going down to Sleep mode under the high network trafic, occasionally.
4. Fixed a problem that comes with a toner in streaks on the back side of the paper.


----------
Firmware Ver.A01.22_0_4
CU : C1.22
Network/WebRemote : 00.47/00.29
IM : 01.04
PU : 00.00.26

1. Improvement of the copy image quality of Text mode.


----------
Firmware Ver.A01.16_0_4
CU : C1.16
Network/WebRemote : 00.47/00.27
IM : 01.04
PU : 00.00.26

1. At the Fax reception of the A4 draft, an image revises a short problem.
2. When scanning with High Compression PDF mode, the scanning setting is user selectable.
3. To fix an issue that not resume from Deep Sleep, occasionally.
4. To fix an issue of the reply for DHCP server during initializing process at wireless LAN.
5. To fix an issue that the problem of the process when wireless LAN connection is disconnected suddenly.


----------
Firmware Ver.A01.10_0_4
CU : C1.10
Network/WebRemote : 00.45/00.26
IM : 01.03
PU : 00.00.23

1. Improved function


----------
Firmware Ver.A01.06_0_4
CU : C1.06
Network/WebRemote : 00.44/00.25
IM : 01.02
PU : 00.00.23

1. To support Google Cloud Print 2.0


(주)한국오키시스템즈

facebook Blog youtube

©1995-2019 Oki Systems Korea Ltd.