Firmware

Paquete de firmware


El paquete de firmware está disponible para descargarlo.

Modelos aplicables

ES5473 MFP; MC573

* La herramienta de actualización del firmware también requiere actualización una vez que se ha descargado el firmware.

Descarga de la herramienta de actualización del firmware >


Para descargar el paquete de firmware, debe aceptar el siguiente "Acuerdo de licencia de software". Asegúrese de leer antes de descargar.

Leer el Acuerdo de licencia de software >

Características

Nombre de archivo OKI_MC573_A07.18_0_5_243416.bin
Versión A07.18_0_5
Tamaño del archivo 274,114,997 Byte
Valor hash MD5 fde93b6b0eed477f623821610dbc5a2a

Actualizar historial

(note) If you update the firmware on a unit that currently has a firmware version older than A07.16, please update the scanner driver to following version.
For Windows : Ver 1.2.3
For Linux : Ver 1.7.0
If you do not update the scanner driver, the error message is displayed at the time of scanning.


Firmware Ver. A07.18_0_5
CU:B7.18
PU:00.01.04
IM:01.02

1. Fixed a problem misdescription of toner empty message in Polish error log.
2. Fixed a problem when Error 078 occurred by panel operation.
3. Fixed a problem SC002 occur at the time of creating acertificate.
--------------------------------------------------------------------------------------
Firmware Ver. A07.16_0_5
CU:B7.16
PU:00.01.04
IM:01.02

1. Fixed a problem when receiving a fax manually, "Storage Space full" is displayed and the MFP sometimes can not receive faxes.
2. Partial specification change of Scan function.
Please update the scanner driver to following version.
For Windows : Ver 1.2.3
For Linux : Ver 1.7.0
If you do not update the scanner driver, the error message is displayed at the time of scanning.
--------------------------------------------------------------------------------------
Firmware Ver. A07.14_0_5
CU:B7.14
PU:00.01.04
IM:01.02

1. Treatment of the WPA2 protocol vulnerabilities.
2. Fixed a problem of NTLMv2 authentication function that is used by Scan To Shared Folder.
--------------------------------------------------------------------------------------
Firmware Ver. A07.09_0_5
CU:B7.09
PU:00.01.04
IM:01.01

1. Fixed a problem that GCP function does not work in Firmware Ver. A07.08.
--------------------------------------------------------------------------------------
Firmware Ver. A07.08_0_5
CU:B7.07
PU:00.01.04
IM:01.01

1. Updated regarding the smart Extendable Platform2.
2. Fixed a problem that print adjusting for tray3 does not work.
3. Fixed a problem that the Custom Size section of Paper Size becomes a blank.
4. Fixed a problem that a fatal error occurs when scanning is canceled or paper jam occurs during scanning with ADF.
5. Fixed a problem that Reconnection may not work in Easy Setup.
6. Fixed a problem that over 17 charactors can be entered to POP password in Easy Setup.
7. Fixed a wording problem that Quiet Mode and Silent Mode becomes the same word in some languages.
8. Fixed a wording problem that Usage Report in German is incorrect.
9. Fixed a problem that plural errors cannot be displayed in the same time while plural errors (Error:340-343:ID missing) occurs in the same time.
--------------------------------------------------------------------------------------
Firmware Ver. A05.02_0_5
CU:B5.02
PU:00.01.03
IM:01.01

1. Fixed a problem that one of the following status might occur when turning on or restarting the PC connected to the MFP with the USB cable.
- Nothing is displayed (Stay in the sleep state)
- The display does not change with key operation
- Does not print
- "815:Error" occurs
--------------------------------------------------------------------------------------
Firmware Ver. A05.01_0_5
CU:B5.01
PU:00.01.03
IM:01.01

1. Fixed a problem that MFP sends unnecessary reply to a certain command.
--------------------------------------------------------------------------------------
Firmware Ver. A05.00_0_5
CU:B5.00
PU:00.01.03
IM:01.01

1. The fax item of the self setup function is improved. Dial tone detection, the reply waiting time and dial classification (automatic setting) are added.
2. Fixed a problem that in case of scan execution from a PC after MacOS 10.12.x, scan of both sides can't be done.
3. Fixed a problem that a card of the FeliCa Lite-S doesn't react. (Only Japanese model)
4. Fixed a problem that when setting equipment as Duplex=ON and doing simplex print of an envelope from a PS driver, 'duplex printing error' occurs.
5. Fixed a problem that when scanning a document with B6 size at both sides, 'ADF Jam' occurs.
6. Fixed a problem that even if the menu of "setting of an attention LED of the near life position" is invalidated, it isn't reflected. (Only overseas model)
7. Indication change of the condition of wireless LAN (the AP mode) information.
--------------------------------------------------------------------------------------
Firmware Ver. A03.04_0_5
CU:B3.04
PU:00.00.34
IM:01.00

1. Fixed a problem that takes time until the device shift to Sleep Mode after printing.
--------------------------------------------------------------------------------------
Firmware Ver. A03.03_0_5
CU:B3.01
PU:00.00.33
IM:01.00


1. Improved to be able to confirm the completion history of the job with a Panel, Web page and Report print.
2. "Delivery Result" is changed which is in "Transmit Confirmation Report" and "Check Message Report" of Email/Internet FAX.
3. Add "Tx/Rx Journal" button to Fax/InternetFax top screen.
4. Add the setting that the name of the phone book is displayed in priority to the "Distant Station" field of fax transmission history.
5. Fixed the Portuguese messages displayed on the panel.
6. Fixed a problem that could not print a URL of the GCP registration.
7. Fixed a problem that all jobs are not displayed with "Cancel" when an alarm occurred during printing with "Print All" of private print.
--------------------------------------------------------------------------------------


Conexión con OKI Europe

linkedin twitter youtube

©1995-2019 Oki Europe Ltd.