Firmware

Firmware Suite


The Firmware Suite is available for download.

Applicable models

C612; C712; ES6412; ES7412

* The firmware update tool is also required for update after the firmware is downloaded.

Download the firmware update tool >


To download the Firmware Suite, you must agree to the following "Software License Agreement". Be sure to read before downloading.

Read the Software License Agreement >

Specifications

File name OKI_C712_A07.04_0_4_233946.bin
Version A07.04_0_4
File size 37,037,381 Byte
MD5 hash value 53402b767adb13bd9fda9f3010364d03

Update history

(note)
If you are updating the firmware on a unit that currently has a firmware version older than A06.51,
the device is added a menu of [Save Job Log]-[Enable/Disable] to [Admin Setup]-[Others Setup]-[Job Log Setup] of the panel menu of the printer.
The initial setting of the [Job Log Setting] is [Disable]. When uses the following utilities and menu setting, please switch to [Enable].
- smart PrintSuperVision
- Alert Information function of Configuration Tool
- [Print Information]-[Job Log]
- [Admin]-[Other Setup]-[Security Setup]-[User Counter Report]
- Export of UsageCounter (Web page only)

For current user using above function, the JobLog function will be turned off automatically without any alert after updating the firmware. This means the log acquisition is not performed.
Please understand that the data which is not collected during this period is not recovered.



Firmware Ver. A07.04_0_4
  CU:B7.03
  PU:00.00.12
  Network/WebRemote:00.11/00.47
  IM:01.01

1. Fixed the problem the message of drum exchange may not disappear and may not print any more even if the drum is exchanged.
    (C612, C712, ES6412, ES7412)
2. Fixed the problem there may be cases where the drum remaining amount is not notified correctly.
    (ES6412, ES7412)

--------------------------------------------------------------------------------------
Firmware Ver. A07.03_0_4
  CU:B7.03
  PU:00.00.11
  Network/WebRemote:00.11/00.47
  IM:01.01

Treatment of the WPA2 protocol vulnerabilities.

--------------------------------------------------------------------------------------
Firmware Ver. A07.02_0_4
  CU:B7.02
  PU:00.00.11
  Network/WebRemote:00.11/00.47
  IM:01.00

1. Fixed a problem that print adjusting for tray3 does not work.
2. Fixed a problem that a letter cannot be entered in SNTP server setting.
3. Fixed a wording problem that Quiet Mode and Silent Mode becomes the same word in some languages.
4. Updated regarding the smart Extendable Platform2.
5. Upgrade Google Cloud Print security.

--------------------------------------------------------------------------------------
Firmware Ver. A06.51_0_4
  CU:B6.51
  PU:00.00.11
  Network/WebRemote:00.10/00.47
  IM:01.00

1. Measures to intermittent print by the consecutive injection of one page per job.
2. Add a menu of [Save Job Log]-[Enable/Disable] to [Admin Setup]-[Others Setup]-[Job Log Setup] of the panel menu of the printer.
  The initial setting of the [Job Log Setting] is [Disable]. When uses the following utilities and menu setting, please switch to [Enable].
   - smart PrintSuperVision
   - Alert Information function of Configuration Tool
   - [Print Information]-[Job Log]
   - [Admin]-[Other Setup]-[Security Setup]-[User Counter Report]
   - Export of UsageCounter (Web page only)
(note)
For current user using above function, the JobLog function will be turned off automatically without any alert after updating the firmware. This means the log acquisition is not performed.
Please understand that the data which is not collected during this period is not recovered.
3. Fixed a problem that printing via wired LAN may be slow.

--------------------------------------------------------------------------------------
Firmware Ver. A05.02_0_4
  CU:B5.02
  PU:00.00.11
  Network/WebRemote:00.10/00.44
  IM:01.00

1. The authentication function by the IC card is supported. User authentication and LDAP authentication are included.
2. Fixed a problem that when the automatic acquisition method of an IP address was established and the IP address couldn't be acquired, status of 'acquisition failure' isn't indicated.
3. Fixed a problem that when the setting is Duplex=ON and excuting simplex print using PS driver, 'Simplex printing was performed as the paper setting did not allow duplex printing.' or 'Duplex Print Failed' may occur.
4. Fixed a problem that even if the menu of "setting of an attention LED of the near life position" is invalidated, it isn't reflected.
5. Indication change of the condition of wireless LAN (the AP mode) information.
6. Fixed a problem that B6 is displayed by a paper size of tray 1 in C612 and ES6412.

--------------------------------------------------------------------------------------
Firmware Ver. A03.00_0_4
  CU:B3.00
  PU:00.00.11
  Network/WebRemote:00.08/00.39
  IM:01.00

1. Improved to be able to confirm the completion history of the job with a Web and Report print.
2. Measures of the issue of RADIUS server certification by the PEAP certification execution of IEEE802.1X.


Connect with OKI Europe

linkedin twitter youtube facebook

Copyright ©1995-2019 Oki Data corporation. All rights reserved.