Utility Software

You can restrict access to this machine by using a user name and password.

If you click (Save to device), the changed settings are reflected to this machine.

Creating a New User

Click [Start], and then select [All programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
Select the machine from [Registered Device Table].
Select the [User Setting] tab.
Click [Role Manager].
Enter the administrator password, and then click [OK].

The factory default password is "999999".
Click [User name/Group management].
Click (New(User)).
Enter the user name and password.

Set other information if necessary.

Display name: Enter a display name.

E-mail address: Enter the mail address of the user.

Language Code: Enter the language code.

PIN: Enter the PIN.

Card ID: Enter the user's IC card information.

Role: Set the role.

Group: Set the group the user belongs to.
Memo
- You can enter PIN (optional) in the user setting.
- You cannot use "admin" as a new user name.
Click [OK].
Click (Save to device).

Click [Start], and then select [All programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
Select the machine from [Registered Device Table].
Select the [User Setting] tab.
Click [Role Manager].
Enter the administrator password, and then click [OK].

The factory default password is "999999".
Click [User name/Group management].
Select the user name to change.
Change settings if necessary, and then click [OK].
Click (Save to device).

Click [Start], and then select [All programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
Select the machine from [Registered Device Table].
Select the [User Setting] tab.
Click [Role Manager].
Enter the administrator password, and then click [OK].

The factory default password is "999999".
Click [User name/Group management].
Select the check box of the user you want to delete.
Click (Delete).
Click [Yes] on a confirmation screen.
Click (Save to device).