Wireless LAN Connection Problems (If Wireless LAN Module is Fitted) (Print)

  • Common to Windows and Mac OS X

Cause

Solution

Reference

No wireless LAN module is installed.

Install the wireless LAN module.

Installing the Wireless LAN module (ES5162LP MFP only)

The wireless LAN module is disabled.

Enable the wireless LAN module.

Installing the Wireless LAN module (ES5162LP MFP only)

The network connection setting is incorrect.

This machine cannot connect to a wired LAN and wireless LAN at the same time. To connect to a wired network, set the network connection to wired. To connect to a wireless network, set the network connection to wireless.

Connecting a LAN Cable

Connecting to a Wireless LAN (MB562dnw, ES5162dnw only or ES5162LP MFP with optional wireless module)

Not connected to a wireless access point.

  • Check that the wireless access point power is switched on.

  • Check the wireless access point settings, and then try the manual settings or automatic settings.

  • Restart the wireless LAN function.

  • On the touch panel, press [Device Settings], select [Admin Setup] > [Network Menu] > [Network Setup] > [Wireless (Infrastructure) Setting], and then select [Wireless reconnection].

Connecting to a Wireless LAN (MB562dnw, ES5162dnw only or ES5162LP MFP with optional wireless module)

  • For Windows

Cause

Solution

Reference

The IP address is incorrect.

  • Check that the same IP address is set for the machine and the machine's port setting on the computer.

  • Check that the IP address is not duplicated by another device.

  • Check that the correct IP address, subnet mask, and gateway address are set.

  • If using OKI LPR Utility, check the IP address setting with OKI LPR Utility.

Easy Setup

OKI LPR Utility

All pages are not printed.

If you are using the WSD port, change it to the standard TCP/IP port.

-