Links User Guide Reference Apache Tomcat Development | | Quick Start |
この文書は，コンテナが管理するセキュリティ (container managed security)
をサポートするように Tomcat を設定する方法を記述しています。
[このとき Tomcat は] ユーザ名，パスワード，ユーザ・ロールからなる既存の
「データベース」へ接続します。
あなたが１個以上の
<security-constraint> 要素か
<login-config> 要素を [web.xml に]
含んだ Web アプリケーションを使っているときだけ，これについて注意が必要です。
[これらの要素は] どのようにユーザに認証が必要とされるかを定義します。
もしもあなたがこれらの機能を利用していないならば，この文書を読み飛ばしてかまいせん。
"コンテナが管理するセキュリティ" についての基礎的な背景となる情報については，
Servlet
Specification (Version 2.4), Section 12 を見てください。
(１仮想ホストの web
アプリケーション全体にわたってユーザが１回だけ認証すればよい)
Tomcat 5 の シングル・サイン・オン (Single Sign On)
機能を利用するための情報については，
ここを見てください。
|
| Overview |
| What is a Realm? |
レルム (Realm) とは，
１個 (または１組) の web アプリケーションの妥当なユーザを識別する
ユーザ名とパスワードの「データベース」です。
これには，妥当な各ユーザにひもづけられたロール (role)
のリストの列挙も随伴します。
ロールのことを Unix 類 OS のグループ (group)
のようなものと考えることもできます。
なぜなら，特定の web アプリケーションのリソースへのアクセスは，
(特定の名前のリストの列挙によるのではなく)
ある特定のロールをもつユーザすべてに許されるからです。
１ユーザの名前に複数のロールをひもづけることができます。
Servlet Specification は，
各アプリケーションがそのセキュリティ要件を (web.xml 配置記述子に)
宣言するというポータブルな機構を記述していますが，
サーブレット・コンテナとそのユーザおよびロール情報間のインタフェースを
定義するポータブルな API はありません。
多くの場合，しかしながら，サーブレット・コンテナを，
製品環境に既存の認証データベースまたは認証機構と「接続」することが望まれます。
そこで Tomcat 5 は
「プラグ・イン」部品がこの接続を確立するために実装すべき Java インタフェース
(org.apache.catalina.Realm)
を定義しています。
さまざまな認証情報源への接続をサポートするため，
五つの標準的なプラグ・インが用意されています。
- JDBCRealm -
関係データベースに格納された認証情報へアクセスします。
関係データベースには，JDBC ドライバ経由でアクセスします。
- DataSourceRealm -
関係データベースに格納された認証情報へアクセスします。
関係データベースには，名前付き JNDI JDBC DataSource 経由でアクセスします。
- JNDIRealm -
LDAP ベースのディレクトリ・サーバに格納された認証情報へアクセスします。
ディレクトリ・サーバには JNDI プロバイダ経由でアクセスします。
- MemoryRealm -
メモリ内オブジェクト・コレクションに格納された認証情報へアクセスします。
コレクションは XML ドキュメント
(
conf/tomcat-users.xml) の内容で初期化されます。
- JAASRealm -
Java Authentication & Authorization Service (JAAS)
フレームワークによって認証情報へアクセスします。
あなた自身の Realm 実装を書いて Tomcat 5
に組込むこともできます。そのためには下記が必要です。
org.apache.catalina.Realm を実装します。- コンパイルしたレルムを $CATALINA_HOME/server/lib に置きます。
- そのレルムを下記の "Configuring a Realm" 節の説明どおりに宣言します。
- そのレルムを MBeans Descriptor
に宣言します。
|
|
| Common Features |
| Digested Passwords |
標準の各レルム実装では，ユーザのパスワードは (デフォルトで) 平文で格納されます。
多くの環境では，これは望ましくありません。
なぜなら，認証データをたまたま見た人が，うまくログオンするのに必要な情報を集めて，
他のユーザになりすますことができるからです。
この問題を避けるために，
標準の実装は，ユーザ・パスワードのダイジェスティング (digesting)
という概念をサポートしています。
これは，格納されたバージョンのパスワードが (容易に解読できない形式に)
符号化されているけれども，レルム実装は依然としてそれを認証に利用できる，
ということを可能にします。
When a standard realm authenticates by retrieving the stored
password and comparing it with the value presented by the user, you
can select digested passwords by specifying the digest
attribute on your <Realm> element. The value for
this attribute must be one of the digest algorithms supported by the
java.security.MessageDigest class (SHA, MD2, or MD5).
When you select this option, the contents of the password that is
stored in the Realm must be the cleartext version of the
password, as digested by the specified algorithm.
When the authenticate() method of the Realm is called, the
(cleartext) password specified by the user is itself digested by the same
algorithm, and the result is compared with the value returned by the
Realm. An equal match implies that the cleartext version of the
original password is the same as the one presented by the user, so that this
user should be authorized.
To calculate the digested value of a cleartext password, two convenience
techniques are supported:
- If you are writing an application that needs to calculate digested
passwords dynamically, call the static
Digest() method of the
org.apache.catalina.realm.RealmBase class, passing the
cleartext password and the digest algorithm name as arguments. This
method will return the digested password.
- If you want to execute a command line utility to calculate the digested
password, simply execute
 | | | |
java org.apache.catalina.realm.RealmBase \
-a {algorithm} {cleartext-password}
| | | | |
If using digested passwords with DIGEST authentication, the cleartext used
to generate the digest is different. In the examples above
{cleartext-password} must be replaced with
{username}:{realm}:{cleartext-password}. For example, in a
development environment this might take the form
testUser:localhost:8080:testPassword.
To use either of the above techniques, the
$CATALINA_HOME/server/lib/catalina.jar file will need to be
on your class path to make the RealmBase class available. In
addition, you will need the JMX jar and the commons-logging jar (either
commons-logging-api.jar or commons-logging.jar). Both of these are included
with the Tomcat distribution.
Non-ASCII usernames and/or passwords are supported using
| | | | java org.apache.catalina.realm.RealmBase \
-a {algorithm} -e {encoding} {input}
| | | | |
{input}:{digest}. If the input appears
corrupted in the return, the digest will be invalid.
|
| Manager Application |
If you wish to use the Manager Application
to deploy and undeploy applications in a running Tomcat 5 installation, you
MUST add the "manager" role to at least one username in your selected Realm
implementation. This is because the manager web application itself uses a
security constraint that requires role "manager" to access ANY request URI
within that application.
For security reasons, no username in the default Realm (i.e. using
conf/tomcat-users.xml is assigned the "manager" role. Therfore,
no one will be able to utilize the features of this application until the
Tomcat administrator specifically assigns this role to one or more users.
|
| Realm Logging |
Debugging and exception messages logged by a Realm will
be recorded by the logging configuration associated with the container
for the realm: its surrounding Context,
Host, or
Engine.
|
|
| Standard Realm Implementations |
| JDBCRealm |
Introduction
JDBCRealm is an implementation of the Tomcat 5
Realm interface that looks up users in a relational database
accessed via a JDBC driver. There is substantial configuration flexibility
that lets you adapt to existing table and column names, as long as your
database structure conforms to the following requirements:
- There must be a table, referenced below as the users table,
that contains one row for every valid user that this
Realm
should recognize.
- The users table must contain at least two columns (it may
contain more if your existing applications required it):
- Username to be recognized by Tomcat when the user logs in.
- Password to be recognized by Tomcat when the user logs in.
This value may in cleartext or digested - see below for more
information.
- There must be a table, referenced below as the user roles table,
that contains one row for every valid role that is assigned to a
particular user. It is legal for a user to have zero, one, or more than
one valid role.
- The user roles table must contain at least two columns (it may
contain more if your existing applications required it):
- Username to be recognized by Tomcat (same value as is specified
in the users table).
- Role name of a valid role associated with this user.
Quick Start
To set up Tomcat to use JDBCRealm, you will need to follow these steps:
- If you have not yet done so, create tables and columns in your database
that conform to the requirements described above.
- Configure a database username and password for use by Tomcat, that has
at least read only access to the tables described above. (Tomcat will
never attempt to write to these tables.)
- Place a copy of the JDBC driver you will be using inside the
$CATALINA_HOME/server/lib directory (if you do not need it
visible to web applications) or $CATALINA_HOME/common/lib
(if it will be used both by Tomcat 5 and by your apps).
Note that only JAR files are recognized!
- Set up a
<Realm> element, as described below, in your
$CATALINA_HOME/conf/server.xml file.
- Restart Tomcat 5 if it is already running.
Realm Element Attributes
To configure JDBCRealm, you will create a <Realm>
element and nest it in your $CATALINA_HOME/conf/server.xml file,
as described above. The following
attributes are supported by this implementation:
| Attribute | Description |
|---|
className |
The fully qualified Java class name of this Realm implementation.
You MUST specify the value
"org.apache.catalina.realm.JDBCRealm" here.
| connectionName |
The database username used to establish a JDBC connection.
| connectionPassword |
The database password used to establish a JDBC connection.
| connectionURL |
The database URL used to establish a JDBC connection.
| digest |
The digest algorithm used to store passwords in non-plaintext formats.
Valid values are those accepted for the algorithm name by the
java.security.MessageDigest class. See
Digested Passwords for more
information. If not specified, passwords are stored in clear text.
| driverName |
The fully qualified Java class name of the JDBC driver to be used.
Consult the documentation for your JDBC driver for the appropriate
value.
| roleNameCol |
The name of the column, in the user roles table, that
contains the name of a role assigned to this user.
| userCredCol |
The name of the column, in the users table, that contains
the password for this user (either in clear text, or digested if the
digest attribute is set).
| userNameCol |
The name of the column, in the users and user roles
tables, that contains the username of this user.
| userRoleTable |
The name of the table that contains one row for each role
assigned to a particular username. This table must include at
least the columns named by the userNameCol and
roleNameCol attributes.
| userTable |
The name of the table that contains one row for each username
to be recognized by Tomcat. This table must include at least the columns
named by the userNameCol and userCredCol
attributes.
|
Example
An example SQL script to create the needed tables might look something
like this (adapt the syntax as required for your particular database):
| | | |
create table users (
user_name varchar(15) not null primary key,
user_pass varchar(15) not null
);
create table user_roles (
user_name varchar(15) not null,
role_name varchar(15) not null,
primary key (user_name, role_name)
);
| | | | |
Example Realm elements are included (commented out) in the
default $CATALINA_HOME/conf/server.xml file. Here's an example
for using a MySQL database called "authority", configured with the tables
described above, and accessed with username "dbuser" and password "dbpass":
| | | |
<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
driverName="org.gjt.mm.mysql.Driver"
connectionURL="jdbc:mysql://localhost/authority?user=dbuser&password=dbpass"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name"/>
| | | | |
Additional Notes
JDBCRealm operates according to the following rules:
- When a user attempts to access a protected resource for the first time,
Tomcat 5 will call the
authenticate() method of this
Realm. Thus, any changes you have made to the database
directly (new users, changed passwords or roles, etc.) will be immediately
reflected.
- Once a user has been authenticated, the user (and his or her associated
roles) are cached within Tomcat for the duration of the user's login.
(For FORM-based authentication, that means until the session times out or
is invalidated; for BASIC authentication, that means until the user
closes their browser). The cached user is not saved and
restored across sessions serialisations. Any changes to the database
information for an already authenticated user will not be
reflected until the next time that user logs on again.
- Administering the information in the users and user roles
table is the responsibility of your own applications. Tomcat does not
provide any built-in capabilities to maintain users and roles.
|
| DataSourceRealm |
Introduction
DataSourceRealm is an implementation of the Tomcat 5
Realm interface that looks up users in a relational database
accessed via a JNDI named JDBC DataSource. There is substantial configuration
flexibility that lets you adapt to existing table and column names, as long
as your database structure conforms to the following requirements:
- There must be a table, referenced below as the users table,
that contains one row for every valid user that this
Realm
should recognize.
- The users table must contain at least two columns (it may
contain more if your existing applications required it):
- Username to be recognized by Tomcat when the user logs in.
- Password to be recognized by Tomcat when the user logs in.
This value may in cleartext or digested - see below for more
information.
- There must be a table, referenced below as the user roles table,
that contains one row for every valid role that is assigned to a
particular user. It is legal for a user to have zero, one, or more than
one valid role.
- The user roles table must contain at least two columns (it may
contain more if your existing applications required it):
- Username to be recognized by Tomcat (same value as is specified
in the users table).
- Role name of a valid role associated with this user.
Quick Start
To set up Tomcat to use DataSourceRealm, you will need to follow these steps:
- If you have not yet done so, create tables and columns in your database
that conform to the requirements described above.
- Configure a database username and password for use by Tomcat, that has
at least read only access to the tables described above. (Tomcat will
never attempt to write to these tables.)
- Configure a JNDI named JDBC DataSource for your database. Refer to the
JNDI DataSource Example HOW-TO
for information on how to configure a JNDI named JDBC DataSource.
- Set up a
<Realm> element, as described below, in your
$CATALINA_HOME/conf/server.xml file.
- Restart Tomcat 5 if it is already running.
Realm Element Attributes
To configure DataSourceRealm, you will create a <Realm>
element and nest it in your $CATALINA_HOME/conf/server.xml file,
as described above. The following
attributes are supported by this implementation:
| Attribute | Description |
|---|
className |
The fully qualified Java class name of this Realm implementation.
You MUST specify the value
"org.apache.catalina.realm.DataSourceRealm" here.
| dataSourceName |
The JNDI named JDBC DataSource for your database. If the DataSource is
local to the context, the name is relative to java:/comp/env,
and otherwise the name should match the name used to define the global
DataSource.
| digest |
The digest algorithm used to store passwords in non-plaintext formats.
Valid values are those accepted for the algorithm name by the
java.security.MessageDigest class. See
Digested Passwords for more
information. If not specified, passwords are stored in clear text.
| localDataSource |
When the realm is nested inside a Context element, this allows the
realm to use a DataSource defined for the Context rather than a global
DataSource. If not specified, the default is false: use a
global DataSource.
| roleNameCol |
The name of the column, in the user roles table, that
contains the name of a role assigned to this user.
| userCredCol |
The name of the column, in the users table, that contains
the password for this user (either in clear text, or digested if the
digest attribute is set).
| userNameCol |
The name of the column, in the users and user roles
tables, that contains the username of this user.
| userRoleTable |
The name of the table that contains one row for each role
assigned to a particular username. This table must include at
least the columns named by the userNameCol and
roleNameCol attributes.
| userTable |
The name of the table that contains one row for each username
to be recognized by Tomcat. This table must include at least the columns
named by the userNameCol and userCredCol
attributes.
|
Example
An example SQL script to create the needed tables might look something
like this (adapt the syntax as required for your particular database):
| | | |
create table users (
user_name varchar(15) not null primary key,
user_pass varchar(15) not null
);
create table user_roles (
user_name varchar(15) not null,
role_name varchar(15) not null,
primary key (user_name, role_name)
);
| | | | |
Here is an example for using a MySQL database called "authority", configured
with the tables described above, and accessed with the JNDI JDBC DataSource with
name "java:/comp/env/jdbc/authority".
| | | |
<Realm className="org.apache.catalina.realm.DataSourceRealm" debug="99"
dataSourceName="jdbc/authority"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name"/>
| | | | |
Additional Notes
DataSourceRealm operates according to the following rules:
- When a user attempts to access a protected resource for the first time,
Tomcat 5 will call the
authenticate() method of this
Realm. Thus, any changes you have made to the database
directly (new users, changed passwords or roles, etc.) will be immediately
reflected.
- Once a user has been authenticated, the user (and his or her associated
roles) are cached within Tomcat for the duration of the user's login.
(For FORM-based authentication, that means until the session times out or
is invalidated; for BASIC authentication, that means until the user
closes their browser). The cached user is not saved and
restored across sessions serialisations. Any changes to the database
information for an already authenticated user will not be
reflected until the next time that user logs on again.
- Administering the information in the users and user roles
table is the responsibility of your own applications. Tomcat does not
provide any built-in capabilities to maintain users and roles.
|
| JNDIRealm |
Introduction
JNDIRealm is an implementation of the Tomcat 5
Realm interface that looks up users in an LDAP directory
server accessed by a JNDI provider (typically, the standard LDAP
provider that is available with the JNDI API classes). The realm
supports a variety of approaches to using a directory for
authentication.
Connecting to the directory
The realm's connection to the directory is defined by the
connectionURL configuration attribute. This is a URL
whose format is defined by the JNDI provider. It is usually an LDAP
URL that specifies the domain name of the directory server to connect
to, and optionally the port number and distinguished name (DN) of the
required root naming context.
If you have more than one provider you can configure an
alternateURL. If a socket connection can not be
made to the provider at the connectionURL an
attempt will be made to use the alternateURL.
When making a connection in order to search the directory and
retrieve user and role information, the realm authenticates itself to
the directory with the username and password specified by the
connectionName and
connectionPassword properties. If these properties
are not specified the connection is anonymous. This is sufficient in
many cases.
Selecting the user's directory entry
Each user that can be authenticated must be represented in the
directory by an individual entry that corresponds to an element in the
initial DirContext defined by the
connectionURL attribute. This user entry must have an
attribute containing the username that is presented for
authentication.
Often the distinguished name of the user's entry contains the
username presented for authentication but is otherwise the same for
all users. In this case the userPattern attribute may
be used to specify the DN, with "{0}" marking where
the username should be substituted.
Otherwise the realm must search the directory to find a unique entry
containing the username. The following attributes configure this
search:
- userBase - the entry that is the base of
the subtree containing users. If not specified, the search
base is the top-level context.
- userSubtree - the search scope. Set to
true if you wish to search the entire subtree
rooted at the userBase entry. The default value
of false requests a single-level search
including only the top level.
- userSearch - pattern specifying the LDAP
search filter to use after substitution of the username.
Authenticating the user
-
Bind mode
By default the realm authenticates a user by binding to
the directory with the DN of the entry for that user and the password
presented by the user. If this simple bind succeeds the user is considered to
be authenticated.
For security reasons a directory may store a digest of the user's
password rather than the clear text version (see Digested Passwords for more information). In that case,
as part of the simple bind operation the directory automatically
computes the correct digest of the plaintext password presented by the
user before validating it against the stored value. In bind mode,
therefore, the realm is not involved in digest processing. The
digest attribute is not used, and will be ignored if
set.
-
Comparison mode
Alternatively, the realm may retrieve the stored
password from the directory and compare it explicitly with the value
presented by the user. This mode is configured by setting the
userPassword attribute to the name of a directory
attribute in the user's entry that contains the password.
Comparison mode has some disadvantages. First, the
connectionName and
connectionPassword attributes must be configured to
allow the realm to read users' passwords in the directory. For
security reasons this is generally undesirable; indeed many directory
implementations will not allow even the directory manager to read
these passwords. In addition, the realm must handle password digests
itself, including variations in the algorithms used and ways of
representing password hashes in the directory. However, the realm may
sometimes need access to the stored password, for example to support
HTTP Digest Access Authentication (RFC 2069). (Note that HTTP digest
authentication is different from the storage of password digests in
the repository for user information as discussed above).
Assigning roles to the user
The directory realm supports two approaches to the representation
of roles in the directory:
-
Roles as explicit directory entries
Roles may be represented by explicit directory entries. A role
entry is usually an LDAP group entry with one attribute
containing the name of the role and another whose values are the
distinguished names or usernames of the users in that role. The
following attributes configure a directory search to
find the names of roles associated with the authenticated user:
- roleBase - the base entry for the role search.
If not specified, the search base is the top-level directory
context.
- roleSubtree - the search
scope. Set to
true if you wish to search the entire
subtree rooted at the roleBase entry. The default
value of false requests a single-level search
including the top level only.
- roleSearch - the LDAP search filter for
selecting role entries. It optionally includes pattern
replacements "{0}" for the distinguished name and/or "{1}" for the
username of the authenticated user.
- roleName - the attribute in a role entry
containing the name of that role.
A combination of both approaches to role representation may be used.
Quick Start
To set up Tomcat to use JNDIRealm, you will need to follow these steps:
- Make sure your directory server is configured with a schema that matches
the requirements listed above.
- If required, configure a username and password for use by Tomcat, that has
read only access to the information described above. (Tomcat will
never attempt to modify this information.)
- Place a copy of the JNDI driver you will be using (typically
ldap.jar available with JNDI) inside the
$CATALINA_HOME/server/lib directory (if you do not need it
visible to web applications) or $CATALINA_HOME/common/lib
(if it will be used both by Tomcat 5 and by your apps).
- Set up a
<Realm> element, as described below, in your
$CATALINA_HOME/conf/server.xml file.
- Restart Tomcat 5 if it is already running.
Realm Element Attributes
To configure JNDIRealm, you will create a <Realm>
element and nest it in your $CATALINA_HOME/conf/server.xml file,
as described above. The following
attributes are supported by this implementation:
| Attribute | Description |
|---|
className |
The fully qualified Java class name of this Realm implementation.
You MUST specify the value
"org.apache.catalina.realm.JNDIRealm" here.
| connectionName |
The directory username to use when establishing a
connection to the directory for LDAP search operations. If not
specified an anonymous connection is made, which is often
sufficient unless you specify the userPassword
property.
| connectionPassword |
The directory password to use when establishing a
connection to the directory for LDAP search operations. If not
specified an anonymous connection is made, which is often
sufficient unless you specify the userPassword
property.
| connectionURL |
The connection URL to be passed to the JNDI driver when
establishing a connection to the directory.
| contextFactory |
The fully qualified Java class name of the JNDI context
factory to be used for this connection. By default, the standard
JNDI LDAP provider is used
(com.sun.jndi.ldap.LdapCtxFactory).
| digest |
The digest algorithm to apply to the plaintext password offered
by the user before comparing it with the value retrieved from the
directory. Valid values are those accepted for the algorithm name
by the java.security.MessageDigest class. See Digested Passwords for more
information. If not specified the plaintext password is assumed to
be retrieved. Not required unless userPassword is
specified
| roleBase |
The base directory entry for performing role searches. If
not specified, the top level element in the directory context
will be used.
| roleName |
The name of the attribute that contains role names in the
directory entries found by a role search. In addition you can
use the userRoleName property to specify the name
of an attribute, in the user's entry, containing additional
role names. If roleName is not specified a role
search does not take place, and roles are taken only from the
user's entry.
| roleSearch |
The LDAP filter expression used for performing role
searches, following the syntax supported by the
java.text.MessageFormat class. Use
{0} to substitute the distinguished name (DN) of
the user, and/or {1} to substitute the
username. If not specified a role search does not take place
and roles are taken only from the attribute in the user's
entry specified by the userRoleName property.
| roleSubtree |
Set to true if you want to search the entire
subtree of the element specified by the roleBase
property for role entries associated with the user. The
default value of false causes only the top level
to be searched.
| userBase |
The base element for user searches performed using the
userSearch expression. If not specified, the top
level element in the directory context will be used. Not used
if you are using the userPattern expression.
| userPassword |
Name of the attribute in the user's entry containing the
user's password. If you specify this value, JNDIRealm will
bind to the directory using the values specified by
connectionName and
connectionPassword properties, and retrieve the
corresponding attribute for comparison to the value specified
by the user being authenticated. If the digest
attribute is set, the specified digest algorithm is applied to
the password offered by the user before comparing it with the
value retrieved from the directory. If you do
not specify this value, JNDIRealm will
attempt a simple bind to the directory using the DN of the
user's entry and password specified by the user, with a
successful bind being interpreted as an authenticated
user.
| userPattern |
A pattern for the distinguished name (DN) of the user's
directory entry, following the syntax supported by the
java.text.MessageFormat class with
{0} marking where the actual username should be
inserted. You can use this property instead of
userSearch, userSubtree and
userBase when the distinguished name contains the
username and is otherwise the same for all users.
| userRoleName |
The name of an attribute in the user's directory entry
containing zero or more values for the names of roles assigned
to this user. In addition you can use the
roleName property to specify the name of an
attribute to be retrieved from individual role entries found
by searching the directory. If userRoleName is
not specified all the roles for a user derive from the role
search.
| userSearch |
The LDAP filter expression to use when searching for a
user's directory entry, with {0} marking where
the actual username should be inserted. Use this property
(along with the userBase and
userSubtree properties) instead of
userPattern to search the directory for the
user's entry.
| userSubtree |
Set to true if you want to search the entire
subtree of the element specified by the userBase
property for the user's entry. The default value of
false causes only the top level to be searched.
Not used if you are using the userPattern
expression.
|
Example
Creation of the appropriate schema in your directory server is beyond the
scope of this document, because it is unique to each directory server
implementation. In the examples below, we will assume that you are using a
distribution of the OpenLDAP directory server (version 2.0.11 or later), which
can be downloaded from
http://www.openldap.org. Assume that
your slapd.conf file contains the following settings
(among others):
| | | |
database ldbm
suffix dc="mycompany",dc="com"
rootdn "cn=Manager,dc=mycompany,dc=com"
rootpw secret
| | | | |
We will assume for connectionURL that the directory
server runs on the same machine as Tomcat. See http://java.sun.com/products/jndi/docs.html
for more information about configuring and using the JNDI LDAP
provider.
Next, assume that this directory server has been populated with elements
as shown below (in LDIF format):
| | | |
# Define top-level entry
dn: dc=mycompany,dc=com
objectClass: dcObject
dc:mycompany
# Define an entry to contain people
# searches for users are based on this entry
dn: ou=people,dc=mycompany,dc=com
objectClass: organizationalUnit
ou: people
# Define a user entry for Janet Jones
dn: uid=jjones,ou=people,dc=mycompany,dc=com
objectClass: inetOrgPerson
uid: jjones
sn: jones
cn: janet jones
mail: j.jones@mycompany.com
userPassword: janet
# Define a user entry for Fred Bloggs
dn: uid=fbloggs,ou=people,dc=mycompany,dc=com
objectClass: inetOrgPerson
uid: fbloggs
sn: bloggs
cn: fred bloggs
mail: f.bloggs@mycompany.com
userPassword: fred
# Define an entry to contain LDAP groups
# searches for roles are based on this entry
dn: ou=groups,dc=mycompany,dc=com
objectClass: organizationalUnit
ou: groups
# Define an entry for the "tomcat" role
dn: cn=tomcat,ou=groups,dc=mycompany,dc=com
objectClass: groupOfUniqueNames
cn: tomcat
uniqueMember: uid=jjones,ou=people,dc=mycompany,dc=com
uniqueMember: uid=fbloggs,ou=people,dc=mycompany,dc=com
# Define an entry for the "role1" role
dn: cn=role1,ou=groups,dc=mycompany,dc=com
objectClass: groupOfUniqueNames
cn: role1
uniqueMember: uid=fbloggs,ou=people,dc=mycompany,dc=com
| | | | |
An example Realm element for the OpenLDAP directory
server configured as described above might look like this, assuming
that users use their uid (e.g. jjones) to login to the
application and that an anonymous connection is sufficient to search
the directory and retrieve role information:
| | | |
<Realm className="org.apache.catalina.realm.JNDIRealm" debug="99"
connectionURL="ldap://localhost:389"
userPattern="uid={0},ou=people,dc=mycompany,dc=com"
roleBase="ou=groups,dc=mycompany,dc=com"
roleName="cn"
roleSearch="(uniqueMember={0})"
/>
| | | | |
With this configuration, the realm will determine the user's
distinguished name by substituting the username into the
userPattern, authenticate by binding to the directory
with this DN and the password received from the user, and search the
directory to find the user's roles.
Now suppose that users are expected to enter their email address
rather than their userid when logging in. In this case the realm must
search the directory for the user's entry. (A search is also necessary
when user entries are held in multiple subtrees corresponding perhaps
to different organizational units or company locations).
Further, suppose that in addition to the group entries you want to
use an attribute of the user's entry to hold roles. Now the entry for
Janet Jones might read as follows:
| | | |
dn: uid=jjones,ou=people,dc=mycompany,dc=com
objectClass: inetOrgPerson
uid: jjones
sn: jones
cn: janet jones
mail: j.jones@mycompany.com
memberOf: role2
memberOf: role3
userPassword: janet
| | | | |
This realm configuration would satisfy the new requirements:
| | | |
<Realm className="org.apache.catalina.realm.JNDIRealm" debug="99"
connectionURL="ldap://localhost:389"
userBase="ou=people,dc=mycompany,dc=com"
userSearch="(mail={0})"
userRoleName="memberOf"
roleBase="ou=groups,dc=mycompany,dc=com"
roleName="cn"
roleSearch="(uniqueMember={0})"
/>
| | | | |
Now when Janet Jones logs in as "j.jones@mycompany.com", the realm
searches the directory for a unique entry with that value as its mail
attribute and attempts to bind to the directory as
uid=jjones,ou=people,dc=mycompany,dc=com with the given
password. If authentication succeeds, she is assigned three roles:
"role2" and "role3", the values of the "memberOf" attribute in her
directory entry, and "tomcat", the value of the "cn" attribute in the
only group entry of which she is a member.
Finally, to authenticate the user by retrieving
the password from the directory and making a local comparison in the
realm, you might use a realm configuration like this:
| | | |
<Realm className="org.apache.catalina.realm.JNDIRealm" debug="99"
connectionName="cn=Manager,dc=mycompany,dc=com"
connectionPassword="secret"
connectionURL="ldap://localhost:389"
userPassword="userPassword"
userPattern="uid={0},ou=people,dc=mycompany,dc=com"
roleBase="ou=groups,dc=mycompany,dc=com"
roleName="cn"
roleSearch="(uniqueMember={0})"
/>
| | | | |
However, as discussed above, the default bind mode for
authentication is usually to be preferred.
Additional Notes
JNDIRealm operates according to the following rules:
- When a user attempts to access a protected resource for the first time,
Tomcat 5 will call the
authenticate() method of this
Realm. Thus, any changes you have made to the directory
(new users, changed passwords or roles, etc.) will be immediately
reflected.
- Once a user has been authenticated, the user (and his or her associated
roles) are cached within Tomcat for the duration of the user's login.
(For FORM-based authentication, that means until the session times out or
is invalidated; for BASIC authentication, that means until the user
closes their browser). The cached user is not saved and
restored across sessions serialisations. Any changes to the directory
information for an already authenticated user will not be
reflected until the next time that user logs on again.
- Administering the information in the directory server
is the responsibility of your own applications. Tomcat does not
provide any built-in capabilities to maintain users and roles.
|
| MemoryRealm |
Introduction
MemoryRealm is a simple demonstration implementation of the
Tomcat 5 Realm interface. It is not designed for production use.
At startup time, MemoryRealm loads information about all users, and their
corresponding roles, from an XML document (by default, this document is loaded from $CATALINA_HOME/conf/tomcat-users.xml). Changes to the data
in this file are not recognized until Tomcat is restarted.
Realm Element Attributes
To configure MemoryRealm, you will create a <Realm>
element and nest it in your $CATALINA_HOME/conf/server.xml file,
as described above. The following
attributes are supported by this implementation:
| Attribute | Description |
|---|
className |
The fully qualified Java class name of this Realm implementation.
You MUST specify the value
"org.apache.catalina.realm.MemoryRealm" here.
| digest |
The digest algorithm used to store passwords in non-plaintext formats.
Valid values are those accepted for the algorithm name by the
java.security.MessageDigest class. See
Digested Passwords for more
information. If not specified, passwords are stored in clear text.
| pathname |
Absolute or relative (to $CATALINA_HOME) pathname of the XML document
containing our valid usernames, passwords, and roles. See below for more
information on the format of this file. If not specified, the value
conf/tomcat-users.xml is used.
|
User File Format
The users file (by default, conf/tomcat-users.xml must be an
XML document, with a root element <tomcat-users>. Nested
inside the root element will be a <user> element for each
valid user, consisting of the following attributes:
- name - Username this user must log on with.
- password - Password this user must log on with (in
clear text if the
digest attribute was not set on the
<Realm> element, or digested appropriately as
described here otherwise).
- roles - Comma-delimited list of the role names
associated with this user.
Example
The default installation of Tomcat 5 is configured with a MemoryRealm
nested inside the <Engine> element, so that it applies
to all virtual hosts and web applications. The default contents of the
conf/tomcat-users.xml file is:
| | | |
<tomcat-users>
<user name="tomcat" password="tomcat" roles="tomcat" />
<user name="role1" password="tomcat" roles="role1" />
<user name="both" password="tomcat" roles="tomcat,role1" />
</tomcat-users>
| | | | |
Additional Notes
MemoryRealm operates according to the following rules:
- When Tomcat first starts up, it loads all defined users and their
associated information from the users file. Changes to the data in
this file will not be recognized until Tomcat is
restarted.
- When a user attempts to access a protected resource for the first time,
Tomcat 5 will call the
authenticate() method of this
Realm.
- Once a user has been authenticated, the user (and his or her associated
roles) are cached within Tomcat for the duration of the user's login.
(For FORM-based authentication, that means until the session times out or
is invalidated; for BASIC authentication, that means until the user
closes their browser). The cached user is not saved and
restored across sessions serialisations.
- Administering the information in the users file is the responsibility
of your application. Tomcat does not
provide any built-in capabilities to maintain users and roles.
|
| JAASRealm |
Introduction
JAASRealm is an implementation of the Tomcat
4 Realm interface that authenticates users through the Java
Authentication & Authorization Service (JAAS) framework, a Java
package that is available as an optional package in Java 2 SDK 1.3 and
is fully integrated as of SDK 1.4 .
Using JAASRealm gives the developer the ability to combine
practically any conceivable security realm with Tomcat's CMA.
JAASRealm is prototype for Tomcat of the proposed JAAS-based
J2EE authentication framework for J2EE v1.4, based on the JCP Specification
Request 196 to enhance container-managed security and promote
'pluggable' authentication mechanisms whose implementations would be
container-independent.
Based on the JAAS login module and principal (see javax.security.auth.spi.LoginModule
and javax.security.Principal), you can develop your own
security mechanism or wrap another third-party mechanism for
integration with the CMA as implemented by Tomcat.
Quick Start
To set up Tomcat to use JAASRealm with your own JAAS login module,
you will need to follow these steps:
- Write your own LoginModule, User and Role classes based
on JAAS (see
the
JAAS Authentication Tutorial and
the JAAS Login Module
Developer's Guide) to be managed by the JAAS Login
Context (
javax.security.auth.login.LoginContext)
When developing your LoginModule, note that JAASRealm's built-in CallbackHandler
+only recognizes the NameCallback and PasswordCallback at present.
- Although not specified in JAAS, you should create
seperate classes to distinguish between users and roles, extending
javax.security.Principal,
so that Tomcat can tell which Principals returned from your login
module are users and which are roles (see org.apache.catalina.realm.JAASRealm).
Regardless, the first Principal returned is always treated as the user Principal.
- Place the compiled classes on Tomcat's classpath
- Set up a login.config file for Java (see JAAS
LoginConfig file) and tell Tomcat where to find it by specifying
its location to the JVM, for instance by setting the environment
variable:
JAVA_OPTS=-DJAVA_OPTS=-Djava.security.auth.login.config==$CATALINA_HOME/conf/jaas.config
- Configure your security-constraints in your web.xml for
the resources you want to protect
- Configure the JAASRealm module in your server.xml
- Restart Tomcat 5 if it is already running.
Realm Element Attributes
To configure JAASRealm as for step 6 above, you create
a <Realm> element and nest it in your
$CATALINA_HOME/conf/server.xml
file within your <Engine> node. The following attributes
are supported by this implementation:
| Attribute | Description |
|---|
className |
The fully qualified Java class name of this Realm implementation.
You MUST specify the value
"org.apache.catalina.realm.JAASRealm" here.
| appName |
The name of the application as configured in your login configuration file
(JAAS LoginConfig).
| userClassNames |
A comma-seperated list of the names of the classes that you have made
for your user Principals.
| roleClassNames |
A comma-seperated list of the names of the classes that you have made
for your role Principals.
| useContextClassLoader |
Instructs JAASRealm to use the context class loader for loading the user-specified
LoginModule class and associated Principal classes. The
default value is true, which is backwards-compatible with the way
Tomcat 4 works. To load classes using the container's classloader, specify
false.
|
Example
Here is an example of how your server.xml snippet should look.
| | | |
<Realm className="org.apache.catalina.realm.JAASRealm"
appName="MyFooRealm"
userClassNames="org.foobar.realm.FooUser"
roleClassNames="org.foobar.realm.FooRole"
debug="99"/>
| | | | |
It is the responsibility of your login module to create and save User and
Role objects representing Principals for the user
(javax.security.auth.Subject). If your login module doesn't
create a user object but also doesn't throw a login exception, then the
Tomcat CMA will break and you will be left at the
http://localhost:8080/myapp/j_security_check URI or at some other
unspecified location.
The flexibility of the JAAS approach is two-fold:
- you can carry out whatever processing you require behind
the scenes in your own login module.
- you can plug in a completely different LoginModule by changing the configuration
and restarting the server, without any code changes to your application.
Additional Notes
- When a user attempts to access a protected resource for
the first time, Tomcat 5 will call the
authenticate()
method of this Realm. Thus, any changes you have made in
the security mechanism directly (new users, changed passwords or
roles, etc.) will be immediately reflected.
- Once a user has been authenticated, the user (and his or
her associated roles) are cached within Tomcat for the duration of
the user's login. For FORM-based authentication, that means until
the session times out or is invalidated; for BASIC authentication,
that means until the user closes their browser. Any changes to the
security information for an already authenticated user will not
be reflected until the next time that user logs on again.
- As with other
Realm implementations, digested passwords
are supported if the <Realm> element in server.xml
contains a digest attribute; JAASRealm's CallbackHandler
will digest the password prior to passing it back to the LoginModule
|
|
|
